装备环境工程
裝備環境工程
장비배경공정
EQUIPMENT ENVIRONMENTAL ENGINEERING
2015年
4期
150-153
,共4页
自然老化%氙灯加速老化%辐射剂量%评价方法
自然老化%氙燈加速老化%輻射劑量%評價方法
자연노화%선등가속노화%복사제량%평개방법
natural weathering%artificial weathering%radiant energy%evaluation method
目的：论述如何通过内、外饰零部件耐候性技术要求的控制，来满足整车在不同地区、不同气候的使用要求。方法通过分析户外自然老化结果的相关性，制定氙灯加速老化测试方法，并在此基础上制定相关要求。结果氙灯老化测试中辐照剂量的控制应以零部件进行分类，技术要求及外观评价应按材料种类进行分类，并分别制定限值要求。结论汽车内、外饰零部件耐候性质量的管控应从测试方法、技术要求、外观评价三方面加以严格控制。
目的：論述如何通過內、外飾零部件耐候性技術要求的控製，來滿足整車在不同地區、不同氣候的使用要求。方法通過分析戶外自然老化結果的相關性，製定氙燈加速老化測試方法，併在此基礎上製定相關要求。結果氙燈老化測試中輻照劑量的控製應以零部件進行分類，技術要求及外觀評價應按材料種類進行分類，併分彆製定限值要求。結論汽車內、外飾零部件耐候性質量的管控應從測試方法、技術要求、外觀評價三方麵加以嚴格控製。
목적：논술여하통과내、외식령부건내후성기술요구적공제，래만족정차재불동지구、불동기후적사용요구。방법통과분석호외자연노화결과적상관성，제정선등가속노화측시방법，병재차기출상제정상관요구。결과선등노화측시중복조제량적공제응이령부건진행분류，기술요구급외관평개응안재료충류진행분류，병분별제정한치요구。결론기차내、외식령부건내후성질량적관공응종측시방법、기술요구、외관평개삼방면가이엄격공제。
Objective To introduce a controlling method through the control of weathering technology requirements of inner/exterior parts, so as to meet the requirements of the vehicle in different regions and climate. Methods Through analysis the correlation of outdoor natural aging results, the test method of xenon lamp aging and relevant requirements was formulated. Results The irradiation dose test of xenon lamp aging should be classified base on the components and parts, the technical requirements and appearance evaluation should be classified according to the type of material, and then the limit requirements were respectively set out. Conclusion The quality control of interior/exterior parts of weathering test should be strengthened from the test methods, technical requirements, and the appearance evaluation.
