电子设计工程
電子設計工程
전자설계공정
ELECTRONIC DESIGN ENGINEERING
2015年
17期
108-111
,共4页
桥式起重机%轨距偏差检测%MC9S12XS128%激光传感器%uCOSII
橋式起重機%軌距偏差檢測%MC9S12XS128%激光傳感器%uCOSII
교식기중궤%궤거편차검측%MC9S12XS128%격광전감기%uCOSII
bridge crane%gauge measurement%MC9S12XS128%laser sensor%uCOSII
针对桥式起重机轨距测量费时费力,测量自动化程度低的问题,设计并实现了一种新型轨距自动化检测装置。该装置以MC9S12XS128单片机为核心,通过长距激光传感器与微距激光传感器检测相应的相对轨距偏差,从而由单片机处理得出轨距实际偏差值;在软件设计中引入uCOSII实时操作系统,确保了装置的稳定性与实时性,从而达到在现场对桥式起重机轨距偏差自动连续测量和不合格点定位的目的。应用结果表明,该测量装置达到了设计要求,具有实用性和推广价值。
針對橋式起重機軌距測量費時費力,測量自動化程度低的問題,設計併實現瞭一種新型軌距自動化檢測裝置。該裝置以MC9S12XS128單片機為覈心,通過長距激光傳感器與微距激光傳感器檢測相應的相對軌距偏差,從而由單片機處理得齣軌距實際偏差值;在軟件設計中引入uCOSII實時操作繫統,確保瞭裝置的穩定性與實時性,從而達到在現場對橋式起重機軌距偏差自動連續測量和不閤格點定位的目的。應用結果錶明,該測量裝置達到瞭設計要求,具有實用性和推廣價值。
침대교식기중궤궤거측량비시비력,측량자동화정도저적문제,설계병실현료일충신형궤거자동화검측장치。해장치이MC9S12XS128단편궤위핵심,통과장거격광전감기여미거격광전감기검측상응적상대궤거편차,종이유단편궤처리득출궤거실제편차치;재연건설계중인입uCOSII실시조작계통,학보료장치적은정성여실시성,종이체도재현장대교식기중궤궤거편차자동련속측량화불합격점정위적목적。응용결과표명,해측량장치체도료설계요구,구유실용성화추엄개치。
In order to solve the problem of bridge crane gauge measurement wasting time and energy, low degree of automation, it is proposed a novel automatic detection device for gauge measurement. The device with microcontroller MC9S12XS128 as the core detects relative gauge deviation by one long distance and two microspur laser sensors, and then gets actual gauge deviation by the microcontroller. Use real-time operating system uCOSII in software to insure the stability and real-time of the device. Therefore, it can accomplish the automatic continuous gauge deviation measurement of bridge crane and to position nonconformity points. The field response showed that the device reached the design requirement with practicability and promotional value.