工业仪表与自动化装置
工業儀錶與自動化裝置
공업의표여자동화장치
INDUSTRIAL INSTRUMENTATION & AUTOMATION
2015年
4期
3-7
,共5页
滑模速度控制器%升降舞台%鲁棒性%多电机同步控制
滑模速度控製器%升降舞檯%魯棒性%多電機同步控製
활모속도공제기%승강무태%로봉성%다전궤동보공제
sliding-mode speed controller%lifting stage%robustness%more than motor synchroniza-tion control
针对舞台多个升降台因负载扰动、停靠过程偏置下沉等因素造成的不同步现象,提出了一种基于滑模与偏差耦合复合控制的舞台升降台同步控制方法。滑模控制取代了常规PI控制;饱和函数替代符号函数用以抑制系统中的抖振现象,同时结合位置偏差耦合进行同步补偿,改善了多个升降台的同步性能。最后分别对该控制策略与主从同步控制进行了仿真研究,结果表明文中方法不仅具有良好的启动与同步性能,而且对外部扰动和内部参数摄动也有良好的鲁棒性。
針對舞檯多箇升降檯因負載擾動、停靠過程偏置下沉等因素造成的不同步現象,提齣瞭一種基于滑模與偏差耦閤複閤控製的舞檯升降檯同步控製方法。滑模控製取代瞭常規PI控製;飽和函數替代符號函數用以抑製繫統中的抖振現象,同時結閤位置偏差耦閤進行同步補償,改善瞭多箇升降檯的同步性能。最後分彆對該控製策略與主從同步控製進行瞭倣真研究,結果錶明文中方法不僅具有良好的啟動與同步性能,而且對外部擾動和內部參數攝動也有良好的魯棒性。
침대무태다개승강태인부재우동、정고과정편치하침등인소조성적불동보현상,제출료일충기우활모여편차우합복합공제적무태승강태동보공제방법。활모공제취대료상규PI공제;포화함수체대부호함수용이억제계통중적두진현상,동시결합위치편차우합진행동보보상,개선료다개승강태적동보성능。최후분별대해공제책략여주종동보공제진행료방진연구,결과표명문중방법불부구유량호적계동여동보성능,이차대외부우동화내부삼수섭동야유량호적로봉성。
For multiple stage lifting platform for load disturbance, the docking process offset subsid-ence caused by factors such as asynchronous phenomenon, this paper proposes a lifting platform based on sliding-mode and composite deviation coupling stage synchronous control method. Sliding-mode control to replace the conventional PI control. Saturation function alternative symbols function to stem the chattering phenomenon of system, combined with location deviation coupling synchronization compensation at the same time, improved the synchronization performance of multiple lifting platform. Finally, respectively, on the control strategy with master-slave synchronization control simulation, the results show that the method not only has a good start and synchronization performance, and the external disturbances and in-ternal parameter perturbation shows good robustness.