河北冶金
河北冶金
하북야금
HEBEI METALLURGY
2015年
8期
64-66
,共3页
陈剑%王文杰%杜彩霞%冯超%殷雪霞
陳劍%王文傑%杜綵霞%馮超%慇雪霞
진검%왕문걸%두채하%풍초%은설하
ICP-AES法%中碳铬铁%硅%锰%磷%含量
ICP-AES法%中碳鉻鐵%硅%錳%燐%含量
ICP-AES법%중탄락철%규%맹%린%함량
ICP-AES method%medium-carbon chromium iron%silicon%manganese%phosphorus%content
采用电感耦合等离子体原子发射光谱法( ICP-AES)测定中碳铬铁中硅锰磷的含量。试样经湿法处理后,通过一系列实验,选择仪器合适的工作条件进行测定,方法的回收率在96%~103%之间,相对标准偏差均小于3%。与传统方法相比,ICP-AES法快速、准确、精密度高。
採用電感耦閤等離子體原子髮射光譜法( ICP-AES)測定中碳鉻鐵中硅錳燐的含量。試樣經濕法處理後,通過一繫列實驗,選擇儀器閤適的工作條件進行測定,方法的迴收率在96%~103%之間,相對標準偏差均小于3%。與傳統方法相比,ICP-AES法快速、準確、精密度高。
채용전감우합등리자체원자발사광보법( ICP-AES)측정중탄락철중규맹린적함량。시양경습법처리후,통과일계렬실험,선택의기합괄적공작조건진행측정,방법적회수솔재96%~103%지간,상대표준편차균소우3%。여전통방법상비,ICP-AES법쾌속、준학、정밀도고。
The content of silicon, manganese and phosphorus in medium -carbon chromium iron is deter-mined with ICP-AES method:at first sample is wet treated, and then conditions selected for the instrument through a series of experiments.The recovery rate of this method is between 96 to 103 percent, all relative standard deviations smaller than 3 percent.Compared with the traditional method, this method is fast, accu-rate and has high precision level.