科技通报
科技通報
과기통보
BULLETIN OF SCIENCE AND TECHNOLOGY
2015年
8期
150-152
,共3页
信息平台%云%中继%物理层%传输协议
信息平檯%雲%中繼%物理層%傳輸協議
신식평태%운%중계%물리층%전수협의
information platform%cloud%relay%physical layers%transmission protocol
在嵌入式云信息平台设计中,需要设计物理层数据传输协议优化信息平台的数据调度和任务分配能力.传统的协议采用UDP协议构建云信息平台的中继物理层数据传输协议,产生大量的流量累积,导致物理层拥堵.提出一种基于双向中继负载均衡的嵌入式云信息平台物理层数据传输协议设计算法.构建嵌入式云信息平台的网络模型,对信息平台数据进行压缩处理,通过双向中继物理层数据传输,定义物理层数据传输的调控函数,实现对数据传输的物理层协议构建,实现数据动态分配.实验结果表明,采用该算法,能有效提高数据的传输效率,降低数据传输延时,优化信息传输部署.
在嵌入式雲信息平檯設計中,需要設計物理層數據傳輸協議優化信息平檯的數據調度和任務分配能力.傳統的協議採用UDP協議構建雲信息平檯的中繼物理層數據傳輸協議,產生大量的流量纍積,導緻物理層擁堵.提齣一種基于雙嚮中繼負載均衡的嵌入式雲信息平檯物理層數據傳輸協議設計算法.構建嵌入式雲信息平檯的網絡模型,對信息平檯數據進行壓縮處理,通過雙嚮中繼物理層數據傳輸,定義物理層數據傳輸的調控函數,實現對數據傳輸的物理層協議構建,實現數據動態分配.實驗結果錶明,採用該算法,能有效提高數據的傳輸效率,降低數據傳輸延時,優化信息傳輸部署.
재감입식운신식평태설계중,수요설계물리층수거전수협의우화신식평태적수거조도화임무분배능력.전통적협의채용UDP협의구건운신식평태적중계물리층수거전수협의,산생대량적류량루적,도치물리층옹도.제출일충기우쌍향중계부재균형적감입식운신식평태물리층수거전수협의설계산법.구건감입식운신식평태적망락모형,대신식평태수거진행압축처리,통과쌍향중계물리층수거전수,정의물리층수거전수적조공함수,실현대수거전수적물리층협의구건,실현수거동태분배.실험결과표명,채용해산법,능유효제고수거적전수효솔,강저수거전수연시,우화신식전수부서.
In the design of embedded cloud information platform, data scheduling and task allocation ability need to design the physical layer data transmission protocol optimization information platform. Relay physical layer data transmission pro-tocol of traditional protocol using UDP protocol to build cloud information platform, produce a lot of flow accumulation, re-sulting in physical layer of jam. This paper presents a load of embedded cloud information platform physical layer data transmission protocol design algorithm based on equilibrium of two-way relay. The construction of network model of embed-ded cloud information platform, information platform for data compression, through two-way relay physical layer data trans-mission, control function defined physical layer data transmission, the realization of physical layer protocol of data transmis-sion of construction, realize the data dynamic allocation. The experimental results show that, using this algorithm, it can ef-fectively improve the data transmission efficiency, and reduce the data transmission delay of message transmission, the opti-mization deployment is obtained.