印制电路信息
印製電路信息
인제전로신식
PRINTED CIRCUIT INFORMATION
2015年
8期
42-44,48
,共4页
动态机械分析仪%差示扫描量热仪%无铅兼容覆铜板%玻璃化转变温度
動態機械分析儀%差示掃描量熱儀%無鉛兼容覆銅闆%玻璃化轉變溫度
동태궤계분석의%차시소묘량열의%무연겸용복동판%파리화전변온도
Dynamic Mechanical Analyzer%Differential Scanning Calorimetry%Lead-Free Compatible Copper Clad Laminate%The Glass Transition Temperature
DSC为业界评判覆铜板材料Tg的通用方法,但随着无铅覆铜板产品中填料比例增加和交联固化度提高，DSC法Tg曲线存在拐点不明显导致结果不准确问题。通过对比DMA与DSC测试原理和DMA法测量系统分析，结果表明对于含填料、PN固化的无铅兼容覆铜板采用DMA测试Tg的稳定性与重现性更好，更能准确地表征板材Tg。
DSC為業界評判覆銅闆材料Tg的通用方法,但隨著無鉛覆銅闆產品中填料比例增加和交聯固化度提高，DSC法Tg麯線存在枴點不明顯導緻結果不準確問題。通過對比DMA與DSC測試原理和DMA法測量繫統分析，結果錶明對于含填料、PN固化的無鉛兼容覆銅闆採用DMA測試Tg的穩定性與重現性更好，更能準確地錶徵闆材Tg。
DSC위업계평판복동판재료Tg적통용방법,단수착무연복동판산품중전료비례증가화교련고화도제고，DSC법Tg곡선존재괴점불명현도치결과불준학문제。통과대비DMA여DSC측시원리화DMA법측량계통분석，결과표명대우함전료、PN고화적무연겸용복동판채용DMA측시Tg적은정성여중현성경호，경능준학지표정판재Tg。
DSC is the universal method of CCL to evaluate the curing degree, but with increase of the content of ifller and improved curing degree, the inlfection point of Tg curve of DSC is not obvious result in Tg inaccurate. Through the comparison of DMA and DSC testing principle and DMA measurement system analysis, the results show that for the ifller containing PN curing of lead-free compatible CCL with better stability and more accurate characterization of Tg with DMA.
