机电工程技术
機電工程技術
궤전공정기술
MACHANICAL & ELECTRICAL ENGINEERING TECHNOLOGY
2015年
8期
29-30,73
,共3页
压痕%刚度%标定
壓痕%剛度%標定
압흔%강도%표정
indentation%stiffness%calibration
为了测量压痕仪的加载刚度，根据Oliver-Pharr模型，建立了系统的总刚度与最大压痕载荷的关系。实验结果表明，该方法可以快速地测量加载机构的刚度。
為瞭測量壓痕儀的加載剛度，根據Oliver-Pharr模型，建立瞭繫統的總剛度與最大壓痕載荷的關繫。實驗結果錶明，該方法可以快速地測量加載機構的剛度。
위료측량압흔의적가재강도，근거Oliver-Pharr모형，건립료계통적총강도여최대압흔재하적관계。실험결과표명，해방법가이쾌속지측량가재궤구적강도。
To obtain stiffness of the indentation loading mechanism, a function between stiffness and the maximum indentation force is established based on the Oliver-Pharr method. The results of experiment show that this method can quickly measure the stiffness of the loading mechanism.
