CAJ | 학술논문

针对酸性荧光染料的特点，对化验室仿样工艺进行优化。试验发现，可优化的工艺条件有酸碱度调节剂、染色保温时间、染后处理洗水温度、固色温度和固色保温时间。经过对这些工艺条件的调整，可以得到优化的化验室仿样工艺。用优化的化验室仿样工艺的结果与大生产样板进行对照，其色差在可接受范围内，各种色牢度也满足要求。
침대산성형광염료적특점，대화험실방양공예진행우화。시험발현，가우화적공예조건유산감도조절제、염색보온시간、염후처리세수온도、고색온도화고색보온시간。경과대저사공예조건적조정，가이득도우화적화험실방양공예。용우화적화험실방양공예적결과여대생산양판진행대조，기색차재가접수범위내，각충색뇌도야만족요구。
In view of the characteristics of acid fluorescent dyes, the laboratory simulation process was optimized. After the experiment, it was found that the optimum technological conditions included pH regulator, dyeing heat holding time, temperature of washing water, fixing temperature and fixation time. The optimized laboratory process can be obtained by adjusting these technological conditions. In comparison with the results of the laboratory simulation process and the mass production model, color difference was acceptable and color fastness can also meet the requirements.