中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2015年
16期
2191-2196,2197
,共7页
王成勇%王荣娟%杨佩旋%文武%邱春林
王成勇%王榮娟%楊珮鏇%文武%邱春林
왕성용%왕영연%양패선%문무%구춘림
微磨料浆体射流%浆体%分散性%悬浮性%钻孔加工
微磨料漿體射流%漿體%分散性%懸浮性%鑽孔加工
미마료장체사류%장체%분산성%현부성%찬공가공
micro abrasive slurry jet%slurry%dispersion%suspension property%drilling
微磨料浆体射流技术是在微磨料水射流加工技术基础上发展起来的一种新技术。通过添加分散剂和悬浮剂来提高浆体的沉降稳定性;为了配制出优质钻孔浆体,研究了磨料质量浓度、磨料种类、分散剂体积分数和悬浮剂体积分数对钻孔加工的影响,并研究了分散剂体积分数和悬浮剂体积分数对浆体沉降稳定性的影响。研究结果表明:磨料质量浓度存在最佳取值;分散剂并非一定能改善颗粒的沉降稳定性,这与磨料种类、磨料质量浓度和分散剂体积分数等有关;悬浮剂能够改善浆体的悬浮性,其体积分数影响浆体的沉降稳定性和钻孔效果。
微磨料漿體射流技術是在微磨料水射流加工技術基礎上髮展起來的一種新技術。通過添加分散劑和懸浮劑來提高漿體的沉降穩定性;為瞭配製齣優質鑽孔漿體,研究瞭磨料質量濃度、磨料種類、分散劑體積分數和懸浮劑體積分數對鑽孔加工的影響,併研究瞭分散劑體積分數和懸浮劑體積分數對漿體沉降穩定性的影響。研究結果錶明:磨料質量濃度存在最佳取值;分散劑併非一定能改善顆粒的沉降穩定性,這與磨料種類、磨料質量濃度和分散劑體積分數等有關;懸浮劑能夠改善漿體的懸浮性,其體積分數影響漿體的沉降穩定性和鑽孔效果。
미마료장체사류기술시재미마료수사류가공기술기출상발전기래적일충신기술。통과첨가분산제화현부제래제고장체적침강은정성;위료배제출우질찬공장체,연구료마료질량농도、마료충류、분산제체적분수화현부제체적분수대찬공가공적영향,병연구료분산제체적분수화현부제체적분수대장체침강은정성적영향。연구결과표명:마료질량농도존재최가취치;분산제병비일정능개선과립적침강은정성,저여마료충류、마료질량농도화분산제체적분수등유관;현부제능구개선장체적현부성,기체적분수영향장체적침강은정성화찬공효과。
Micro abrasive slurry jet is a new technology developed in the abrasive water jet machi-ning technology.The sedimentation stability of slurry was improved by adding dispersant and suspen-ding agents.For the preparation of a high quality drilling slurry,the influences of abrasive mass con-centration,abrasive type,dispersant volume fraction and suspension volume fraction on glass micro-hole drilling were studied,and the influences of dispersant volume fraction and suspension volume fraction on the sedimentation stability of slurry were also investigated.The results indicate that abra-sive mass concentration possesses a best value.Dispersant does not necessarily improve the sedimen-tation stability of the particles,which is related with the type of the abrasive,the abrasive mass con-centration and the dispersant volume fraction and so on.Suspending agents can improve suspension of abrasive,its volume fraction affects the sedimentation stability of slurry and glass micro hole drilling.