电子元件与材料
電子元件與材料
전자원건여재료
ELECTRONIC COMPONENTS & MATERIALS
2015年
9期
54-58
,共5页
刘培生%卢颖%杨龙龙%刘亚鸿
劉培生%盧穎%楊龍龍%劉亞鴻
류배생%로영%양룡룡%류아홍
塑封器件%J积分%分层%裂纹扩展%仿真%新模型
塑封器件%J積分%分層%裂紋擴展%倣真%新模型
소봉기건%J적분%분층%렬문확전%방진%신모형
plastic packaging device%J integrality%delamination%crack extension%simulation%new model
针对一款LQFP塑封器件,利用ANSYS有限软件建立了三维模型,根据断裂参数——J积分,讨论分析了芯片/塑封料界面的三种分层区域模型,得到了分层的主要扩展模型,即凸形分层区域,同时提出了一种分层扩展趋势的新模型,进而对凸形分层模型探讨了温度和裂纹半径对器件分层的影响。仿真数据表明,在极端低温或高温下,器件的分层区域容易扩展;而在一定的应力条件下,裂纹扩展的趋势会受到裂纹半径大小的影响。
針對一款LQFP塑封器件,利用ANSYS有限軟件建立瞭三維模型,根據斷裂參數——J積分,討論分析瞭芯片/塑封料界麵的三種分層區域模型,得到瞭分層的主要擴展模型,即凸形分層區域,同時提齣瞭一種分層擴展趨勢的新模型,進而對凸形分層模型探討瞭溫度和裂紋半徑對器件分層的影響。倣真數據錶明,在極耑低溫或高溫下,器件的分層區域容易擴展;而在一定的應力條件下,裂紋擴展的趨勢會受到裂紋半徑大小的影響。
침대일관LQFP소봉기건,이용ANSYS유한연건건립료삼유모형,근거단렬삼수——J적분,토론분석료심편/소봉료계면적삼충분층구역모형,득도료분층적주요확전모형,즉철형분층구역,동시제출료일충분층확전추세적신모형,진이대철형분층모형탐토료온도화렬문반경대기건분층적영향。방진수거표명,재겁단저온혹고온하,기건적분층구역용역확전;이재일정적응력조건하,렬문확전적추세회수도렬문반경대소적영향。
A specified LQFP package was used as a demonstrator. The three dimensional model was established by finite element software ANSYS. Using the fracture parameter—J integrality, three models of delaminating area on the die/EMC interface were discussed and analyzed. Then, the main delamination extension mode was achieved, which was convex delaminating area. A new delamination extension process was put forward at the same time. The temperature and radius of crack effect on the delamination were discussed based on this convex delamination model. The simulation data show that the delaminating area can be extended easily under the extreme low or high temperatures, and the trend of crack extension is also affected by the radius of crack under the condition of a certain stress.