现代制造技术与装备
現代製造技術與裝備
현대제조기술여장비
MODERN MANUFACTURING TECHNOLOGY AND EQUIPMENT
2015年
4期
57,70
,共2页
换面法%投影%图解法%几何元素
換麵法%投影%圖解法%幾何元素
환면법%투영%도해법%궤하원소
surface method%projection%graphical method%geo-metric elements
当几何元素相对投影面处于特殊位置时,其投影能直接反映实形或有积聚性,此时度量问题比较简单;但当处于一般位置时,其投影不具有以上特点,度量问题就比较复杂.本文分几种情况分别讨论了利用换面法将一般位置直线或平面转换至对投影面的特殊位置,以简化图解度量问题.
噹幾何元素相對投影麵處于特殊位置時,其投影能直接反映實形或有積聚性,此時度量問題比較簡單;但噹處于一般位置時,其投影不具有以上特點,度量問題就比較複雜.本文分幾種情況分彆討論瞭利用換麵法將一般位置直線或平麵轉換至對投影麵的特殊位置,以簡化圖解度量問題.
당궤하원소상대투영면처우특수위치시,기투영능직접반영실형혹유적취성,차시도량문제비교간단;단당처우일반위치시,기투영불구유이상특점,도량문제취비교복잡.본문분궤충정황분별토론료이용환면법장일반위치직선혹평면전환지대투영면적특수위치,이간화도해도량문제.
When the geometry elements in a special position relative to the projection plane, its projection can directly reflect the real shape or accumulation, and the measurement is simple; But when in a general po-sition, its projection do not have the above characteristics, measurement problem is more complicated. This paper respectively discusses the changing surface method which is used in several conditions to transform general position straight line or plane to the special position of plane, in order to simplify the diagram to measurement problems.
