电力科学与工程
電力科學與工程
전력과학여공정
INFORMATION ON ELECTRIC POWER
2015年
8期
55-59
,共5页
诱导式风管%吸收段%二次风口%数值模拟
誘導式風管%吸收段%二次風口%數值模擬
유도식풍관%흡수단%이차풍구%수치모의
induction duct%absorption section%secondary air inlet%numerical simulation
低温送风诱导式缩放风管具有结构简单、造价低廉、节省能耗、噪声低、维修工作量小和能利用普通风口等优点,但不易达到较高的诱导比。运用CFD软件对风管内部流体特性进行模拟,通过云图进行压力分析,并在云图静压较低处对应地设置二次风口。计算各种情况下诱导风管的诱导比,通过诱导比计算值的对比,确定出二次风口的最佳位置,设计出诱导式缩放风管的吸收段。
低溫送風誘導式縮放風管具有結構簡單、造價低廉、節省能耗、譟聲低、維脩工作量小和能利用普通風口等優點,但不易達到較高的誘導比。運用CFD軟件對風管內部流體特性進行模擬,通過雲圖進行壓力分析,併在雲圖靜壓較低處對應地設置二次風口。計算各種情況下誘導風管的誘導比,通過誘導比計算值的對比,確定齣二次風口的最佳位置,設計齣誘導式縮放風管的吸收段。
저온송풍유도식축방풍관구유결구간단、조개저렴、절성능모、조성저、유수공작량소화능이용보통풍구등우점,단불역체도교고적유도비。운용CFD연건대풍관내부류체특성진행모의,통과운도진행압력분석,병재운도정압교저처대응지설치이차풍구。계산각충정황하유도풍관적유도비,통과유도비계산치적대비,학정출이차풍구적최가위치,설계출유도식축방풍관적흡수단。
Considering its simple structure , low cost, energy savings , little noise, small amount of maintenance and adaptability to normal vent , cold air distribution induction scaling duct is spoken highly of .But it is not easy to reach a high induction ratio .In this paper , CFD software was adopted to simulate internal fluid properties in the in-duction ducts .Then secondary air inlets were located in the position with the lowest static pressure after the analy -sis of the contours .Finally, the induction ratios for different ducts were calculated .After comparing induction rati-os, the optimal location of secondary air inlet is determined and the absorption section is designed .