中国重型装备
中國重型裝備
중국중형장비
CHINA HEAVY EQUIPMENT
2015年
3期
45-46
,共2页
06Cr19Ni10钢%冷轧板%点状缺陷%表面粗糙度
06Cr19Ni10鋼%冷軋闆%點狀缺陷%錶麵粗糙度
06Cr19Ni10강%랭알판%점상결함%표면조조도
06Cr19Ni10 steel%cold rolled plate%spot shape defect%surface roughness
针对06Cr19Ni10冷轧板表面出现点状缺陷问题，选取试样进行宏观检测、金相分析、扫描电镜能谱分析，发现酸洗板表面粗糙度过大是造成缺陷产生的主要原因，并提出了相应的控制措施。
針對06Cr19Ni10冷軋闆錶麵齣現點狀缺陷問題，選取試樣進行宏觀檢測、金相分析、掃描電鏡能譜分析，髮現痠洗闆錶麵粗糙度過大是造成缺陷產生的主要原因，併提齣瞭相應的控製措施。
침대06Cr19Ni10랭알판표면출현점상결함문제，선취시양진행굉관검측、금상분석、소묘전경능보분석，발현산세판표면조조도과대시조성결함산생적주요원인，병제출료상응적공제조시。
Regarding to spot defects issue on the surface of 06Cr19Ni10 cold rolled plate, methods of macro detec-tion, metallographic analysis and SEM energy spectrum analysis have been conducted on the specimen.Overmuch sur-face roughness of the pickling plate was the main cause of defects, and further relevant control measures have been put forward.
