超硬材料工程
超硬材料工程
초경재료공정
SUPERHARD MATERIAL ENGINEERING
2015年
4期
34-36
,共3页
贾攀%刘乾坤%张凤莲%胡来运%吴定雨%王飞飞%丁建
賈攀%劉乾坤%張鳳蓮%鬍來運%吳定雨%王飛飛%丁建
가반%류건곤%장봉련%호래운%오정우%왕비비%정건
叶蜡石%金刚石%密封性%六面顶压机
葉蠟石%金剛石%密封性%六麵頂壓機
협사석%금강석%밀봉성%륙면정압궤
pyrophyllite%diamond%sealing performance%Cubic Press
在合成金刚石的过程中,叶蜡石密封性能的降低会出现气泡,影响顶锤寿命,给企业带来较大的经济损失。笔者根据实际生产情况,建立叶蜡石密封边流变性与六面顶顶锤结构之间的模型,并提出因顶锤模型设计的原因,叶蜡石密封边两端的相对压缩密度比中间小,造成密封边两端密封性能较弱,这就是气泡常在密封边两端产生的重要原因之一。
在閤成金剛石的過程中,葉蠟石密封性能的降低會齣現氣泡,影響頂錘壽命,給企業帶來較大的經濟損失。筆者根據實際生產情況,建立葉蠟石密封邊流變性與六麵頂頂錘結構之間的模型,併提齣因頂錘模型設計的原因,葉蠟石密封邊兩耑的相對壓縮密度比中間小,造成密封邊兩耑密封性能較弱,這就是氣泡常在密封邊兩耑產生的重要原因之一。
재합성금강석적과정중,협사석밀봉성능적강저회출현기포,영향정추수명,급기업대래교대적경제손실。필자근거실제생산정황,건립협사석밀봉변류변성여륙면정정추결구지간적모형,병제출인정추모형설계적원인,협사석밀봉변량단적상대압축밀도비중간소,조성밀봉변량단밀봉성능교약,저취시기포상재밀봉변량단산생적중요원인지일。
During the process of diamond synthesis,the reducing sealing performance of pyrophyllite will generate bubbles which influences the service life of anvil and causes big economic losses for enterprise.The author has set up a model between pyrophyllite seal-ing edge rheological property and anvil structure of cubic press according to the actual production condition.He also points out that due to the model design of the anvil,the relative compression density of both sides of the pyrophyllite sealing edge is smaller than that in the middle.This leads to the weaker sealing performance for the both sides of the sealing edge and contributes to the reasons why bubbles always generate at both sides of the sealing edge.