医学信息
醫學信息
의학신식
MEDICAL INFORMATION
2015年
34期
28-28
,共1页
蒸汽灭菌%冲孔托盘%温湿度%冷却%卸载
蒸汽滅菌%遲孔託盤%溫濕度%冷卻%卸載
증기멸균%충공탁반%온습도%냉각%사재
Steam sterilization%Punching tray%Temperature and Humidity%Cooling%Unloading
目的通过对两种不同托盘包裹的无菌包，高压蒸汽灭菌后其包内温湿度变化的比较，探讨最佳的消毒打包材料。方法用两种不同托盘打无菌包，在灭菌程序结束10min时打开柜门，柜内冷却至30min、60min时分别测试其包内温湿度，并对实验组和对照组测试结果进行统计学分析。结果实验组和对照组温湿度变化情况比较具有统计学意义(<0.01)。结论冲孔托盘包较普通托盘包温湿度下降速度快，明显低于卫生部《消毒技术规范》的标准。
目的通過對兩種不同託盤包裹的無菌包，高壓蒸汽滅菌後其包內溫濕度變化的比較，探討最佳的消毒打包材料。方法用兩種不同託盤打無菌包，在滅菌程序結束10min時打開櫃門，櫃內冷卻至30min、60min時分彆測試其包內溫濕度，併對實驗組和對照組測試結果進行統計學分析。結果實驗組和對照組溫濕度變化情況比較具有統計學意義(<0.01)。結論遲孔託盤包較普通託盤包溫濕度下降速度快，明顯低于衛生部《消毒技術規範》的標準。
목적통과대량충불동탁반포과적무균포，고압증기멸균후기포내온습도변화적비교，탐토최가적소독타포재료。방법용량충불동탁반타무균포，재멸균정서결속10min시타개거문，거내냉각지30min、60min시분별측시기포내온습도，병대실험조화대조조측시결과진행통계학분석。결과실험조화대조조온습도변화정황비교구유통계학의의(<0.01)。결론충공탁반포교보통탁반포온습도하강속도쾌，명현저우위생부《소독기술규범》적표준。
Objective For the purpose of plumbing an optimal packaging material of a sterile package, the researchers made a comparison of changes in both the temperature and the humidity of sterile packages wrapping in dif erent types of trays in the very condition of high-pressure steam sterilization. Methods First, conduct the package by using the two sorts of tray. Open the door of the sterilizer 10 minutes after the end of the sterilizing process. Check the temperature and the humidity of the packages when the sterilizer cooled to 30 minutes and 60 minutes respectively. Make a statistical analysis of the test results of the experimental group and the control group. Results It is of statistical importance to compare the changes in temperature and humidity of the experimental group and the control group ( <0.01).Conclusion Compare to the ordinary tray package, the temperature and the humidity of the punching tray package decrease rapidly, which are significantly lower than the standardized figures of Technical Standard For disinfection published by the Ministry of Health.
