价值工程
價值工程
개치공정
VALUE ENGINEERING
2015年
27期
70-72
,共3页
温崇%王天锋%李琳琳
溫崇%王天鋒%李琳琳
온숭%왕천봉%리림림
电机主轴%断裂%仿真分析%优化改进
電機主軸%斷裂%倣真分析%優化改進
전궤주축%단렬%방진분석%우화개진
motor main shaft%rupture%simulation analysis%optimization and improvement
根据具体案例，结合负载工况参数，对YB2-355S-1090kW电机主轴断裂进行分析，并利用Solidworks及ANSYS workbench软件对分析和改进结果进行实例仿真，进一步优化电机主轴结构设计，使之更能适用于复杂工况。
根據具體案例，結閤負載工況參數，對YB2-355S-1090kW電機主軸斷裂進行分析，併利用Solidworks及ANSYS workbench軟件對分析和改進結果進行實例倣真，進一步優化電機主軸結構設計，使之更能適用于複雜工況。
근거구체안례，결합부재공황삼수，대YB2-355S-1090kW전궤주축단렬진행분석，병이용Solidworks급ANSYS workbench연건대분석화개진결과진행실례방진，진일보우화전궤주축결구설계，사지경능괄용우복잡공황。
Main shaft rupture of motor YB2-355S-10 was analyzed on the bases of practical cases with combining the load condition parameters. The analysis results and improvement was simulated with an instance by using softwares Solidworks and ANSYS workbench to further improve the main shaft structure and make it could work well on the complicated work condition.
