韶关学院学报
韶關學院學報
소관학원학보
Journal of Shaoguan University(Social Science Edition)
2006年
6期
79~82
,共null页
转炉钢渣 粉体工程 粉体性能
轉爐鋼渣 粉體工程 粉體性能
전로강사 분체공정 분체성능
converter steel slag; powder engineering; powder characteristics
采用Ф500×500衄球磨机,磨制了比表面积为210~485m^2·kg^-1的慢冷转炉钢渣粉体,并对其粉体特性进行了研究.所测性能包括:安息角、自然堆积密度、粉体压缩特性和力学特性.研究结果表明:慢冷转炉钢渣粉体是一种粘聚性较低的典型库仑粉体,其粘聚性低于高炉矿渣粉体;随着比表面积的增大,慢冷转炉钢渣粉体的安息角随之增大,而自然堆积密度和压缩密度随之减小.当压力卸栽时,受压粉体表现出了一定的弹性性能.
採用Ф500×500衄毬磨機,磨製瞭比錶麵積為210~485m^2·kg^-1的慢冷轉爐鋼渣粉體,併對其粉體特性進行瞭研究.所測性能包括:安息角、自然堆積密度、粉體壓縮特性和力學特性.研究結果錶明:慢冷轉爐鋼渣粉體是一種粘聚性較低的典型庫崙粉體,其粘聚性低于高爐礦渣粉體;隨著比錶麵積的增大,慢冷轉爐鋼渣粉體的安息角隨之增大,而自然堆積密度和壓縮密度隨之減小.噹壓力卸栽時,受壓粉體錶現齣瞭一定的彈性性能.
채용Ф500×500뉵구마궤,마제료비표면적위210~485m^2·kg^-1적만랭전로강사분체,병대기분체특성진행료연구.소측성능포괄:안식각、자연퇴적밀도、분체압축특성화역학특성.연구결과표명:만랭전로강사분체시일충점취성교저적전형고륜분체,기점취성저우고로광사분체;수착비표면적적증대,만랭전로강사분체적안식각수지증대,이자연퇴적밀도화압축밀도수지감소.당압력사재시,수압분체표현출료일정적탄성성능.
The powder characteristics of the converter steel slag cooled naturally, with 210 - 485 m^2 ·kg^-1 Blaine specific surface area, have been studied by using a Ф 500 × 500 mm cement ball mill as grinding device in this paper. The powder characteristics measured in this study include stopping angle, natural packing density, condensability and mechanical properties. The experimental results indicate that the stopping angle is increasing with the specific surface area, whereas both the natural packing density and compressing density are decreasing with it. The steel slag powder is a typical coulomb powder, but with lower cohesion in comparison to the ground granulated blast - furnace slag. When the stress is removed, the compacted powder may exhibits a little elasticity.