焊管
銲管
한관
Welded Pipe and Tube
2015年
8期
51-59,65
,共10页
不锈钢焊管%给水加热器%凝汽器%固溶退火热处理%泄漏%应力腐蚀开裂(SCC)
不鏽鋼銲管%給水加熱器%凝汽器%固溶退火熱處理%洩漏%應力腐蝕開裂(SCC)
불수강한관%급수가열기%응기기%고용퇴화열처리%설루%응력부식개렬(SCC)
stainless steel welded pipe%feedwater heater%condenser%solution annealing heat treatment%leakage%stress corrosion cracking(SCC)
凝汽器和给水加热器是超超临界电站设备中可采用不锈钢焊管制造的部件。国内虽早已具备此类高档次不锈钢焊管的生产条件，但至今仍难以达到高标准要求而进入国际市场竞争。结合小直径连续不锈钢焊管生产现状探讨了此类焊管制造质量控制要素。介绍了两个冷凝器失效案例，借以指明此类换热器失效泄漏的原因，指出304钢管并非此类应用的理想选择，并讨论了不锈钢焊管制造标准等细节。
凝汽器和給水加熱器是超超臨界電站設備中可採用不鏽鋼銲管製造的部件。國內雖早已具備此類高檔次不鏽鋼銲管的生產條件，但至今仍難以達到高標準要求而進入國際市場競爭。結閤小直徑連續不鏽鋼銲管生產現狀探討瞭此類銲管製造質量控製要素。介紹瞭兩箇冷凝器失效案例，藉以指明此類換熱器失效洩漏的原因，指齣304鋼管併非此類應用的理想選擇，併討論瞭不鏽鋼銲管製造標準等細節。
응기기화급수가열기시초초림계전참설비중가채용불수강한관제조적부건。국내수조이구비차류고당차불수강한관적생산조건，단지금잉난이체도고표준요구이진입국제시장경쟁。결합소직경련속불수강한관생산현상탐토료차류한관제조질량공제요소。개소료량개냉응기실효안례，차이지명차류환열기실효설루적원인，지출304강관병비차류응용적이상선택，병토론료불수강한관제조표준등세절。
Condenser and feedwater heater are components manufactured by adopting stainless steel pipe in equipment of ultra super critical power station. It although already possess such high-grade stainless steel welded pipe production conditions in China domestic, but is still difficult to meet the requirements of high standard and enter into the international market competition. It discussed control factors of small diameter stainless steel welded pipe combined with production current status in this article. It also introduced two failed examples of condenser, so as to indicate the causes for the leakage of such heat exchanger failure, and 304 steel pipeis not the ideal choice. Finally, it discussed manufacturing standards details for stainless steel pipe.
