航空制造技术
航空製造技術
항공제조기술
Aeronautical Manufacturing Technology
2015年
3期
65-68
,共4页
柴禄%黄继华%王立%侯金保%郎波
柴祿%黃繼華%王立%侯金保%郎波
시록%황계화%왕립%후금보%랑파
单晶高温合金%过渡液相扩散%EBSD组织%断裂
單晶高溫閤金%過渡液相擴散%EBSD組織%斷裂
단정고온합금%과도액상확산%EBSD조직%단렬
Single crystal%Transient liquid phase diffusion bonding%EBSD microstructure%Fracture
为研究N5单晶含取向差TLP接头组织和断裂机理,制备了有取向差和无取向差的接头。对接头微观组织进行SEM检测,跨焊缝进行了EBSD检测,并对接头进行了高温持久拉断试验。结果表明,两侧母材存在10°取向差时焊缝中心无法实现单晶化而形成晶界,晶界处元素偏聚导致在降温过程中形成碳化物和硼化物的第2相粒子;断口分析表明B接头以准解理形式断裂,裂纹起源于第2相粒子。
為研究N5單晶含取嚮差TLP接頭組織和斷裂機理,製備瞭有取嚮差和無取嚮差的接頭。對接頭微觀組織進行SEM檢測,跨銲縫進行瞭EBSD檢測,併對接頭進行瞭高溫持久拉斷試驗。結果錶明,兩側母材存在10°取嚮差時銲縫中心無法實現單晶化而形成晶界,晶界處元素偏聚導緻在降溫過程中形成碳化物和硼化物的第2相粒子;斷口分析錶明B接頭以準解理形式斷裂,裂紋起源于第2相粒子。
위연구N5단정함취향차TLP접두조직화단렬궤리,제비료유취향차화무취향차적접두。대접두미관조직진행SEM검측,과한봉진행료EBSD검측,병대접두진행료고온지구랍단시험。결과표명,량측모재존재10°취향차시한봉중심무법실현단정화이형성정계,정계처원소편취도치재강온과정중형성탄화물화붕화물적제2상입자;단구분석표명B접두이준해리형식단렬,렬문기원우제2상입자。
Joints with or without misorienta-tion are prepared in order to discuss the microstructure and fracture mechanism of a joint that with a misorienta-tion. Microstructure is SEM tested, orientation data are observed by the method of EBSD and the high temperature creep rupture tests are carried out. Results show that crys-tal boundary can be found in the center line when there is a 10 degree misorientation between the two parts of base metal. Carbide and boride are formed by the effect of high energy boundary and element segregation. Fracture analy-sis reveals that cracks generate from the second phase par-ticle and the joint fractures in the form of quasi-cleavage fracture.