广东化工
廣東化工
엄동화공
Guangdong Chemical Industry
2015年
15期
47-48
,共2页
蔡云飞%王裕耀%陈峰%罗五魁
蔡雲飛%王裕耀%陳峰%囉五魁
채운비%왕유요%진봉%라오괴
分子筛%水热合成%磷酸硅铝%表征
分子篩%水熱閤成%燐痠硅鋁%錶徵
분자사%수열합성%린산규려%표정
采用水热合成法,二乙烯三胺(DETA)为模板剂,通过调节模板剂的用量、pH、晶化温度和晶化时间,合成出含锌分子筛,得到合成原料的最佳配比为:n(P2O5)∶n(H2O)∶n(SiO2)∶n(Al2O3)∶n(Zn)∶(DETA)=0.18∶0.85∶0.15∶0.04∶0.10∶0.25,在550℃时恒温4h,除去模板剂二乙烯三胺,并通过扫描电子显微镜(SEM)、热重(TG)及红外光谱(IR)等方法对合成的分子筛进行了表征,结果表明,合成的分子筛纯度较高,形貌为立方体,热重曲线表明所合成的分子筛具有良好的热稳定性.
採用水熱閤成法,二乙烯三胺(DETA)為模闆劑,通過調節模闆劑的用量、pH、晶化溫度和晶化時間,閤成齣含鋅分子篩,得到閤成原料的最佳配比為:n(P2O5)∶n(H2O)∶n(SiO2)∶n(Al2O3)∶n(Zn)∶(DETA)=0.18∶0.85∶0.15∶0.04∶0.10∶0.25,在550℃時恆溫4h,除去模闆劑二乙烯三胺,併通過掃描電子顯微鏡(SEM)、熱重(TG)及紅外光譜(IR)等方法對閤成的分子篩進行瞭錶徵,結果錶明,閤成的分子篩純度較高,形貌為立方體,熱重麯線錶明所閤成的分子篩具有良好的熱穩定性.
채용수열합성법,이을희삼알(DETA)위모판제,통과조절모판제적용량、pH、정화온도화정화시간,합성출함자분자사,득도합성원료적최가배비위:n(P2O5)∶n(H2O)∶n(SiO2)∶n(Al2O3)∶n(Zn)∶(DETA)=0.18∶0.85∶0.15∶0.04∶0.10∶0.25,재550℃시항온4h,제거모판제이을희삼알,병통과소묘전자현미경(SEM)、열중(TG)급홍외광보(IR)등방법대합성적분자사진행료표정,결과표명,합성적분자사순도교고,형모위립방체,열중곡선표명소합성적분자사구유량호적열은정성.