桂林电子科技大学学报
桂林電子科技大學學報
계림전자과기대학학보
Journal of Guilin University of Electronic Technology
2015年
4期
290-293
,共4页
何年清%车俐%刘朝欣%沈通桥%李安锦%林桂斌
何年清%車俐%劉朝訢%瀋通橋%李安錦%林桂斌
하년청%차리%류조흔%침통교%리안금%림계빈
CAN%嵌入式网络%LPC11C24%CANopen%QT
CAN%嵌入式網絡%LPC11C24%CANopen%QT
CAN%감입식망락%LPC11C24%CANopen%QT
CAN%embedded network%LPC11C24%CANopen%QT
针对现有传感器体积大、功耗大、性价比低等不足,以片内ROM整合CANopen驱动器的LPC11C24低功耗微处理器和基于 QT设计的上位机为核心,采用CAN总线技术,设计了体积小、功耗低的嵌入式网络化智能传感器系统。传感器系统的主控芯片 LPC11C24以CANopen标准为基础提供多种 API接口,可将 LPC11C24快速整合至嵌入式网络应用中。在基于 QT设计的上位机界面上可方便地完成CAN总线网络上多点传感器的管理与配置。测试结果表明,传感器系统实现了体积小、功耗低、性价比高、功能强和便于扩展的设计目标,加快了智能传感器的开发与应用。
針對現有傳感器體積大、功耗大、性價比低等不足,以片內ROM整閤CANopen驅動器的LPC11C24低功耗微處理器和基于 QT設計的上位機為覈心,採用CAN總線技術,設計瞭體積小、功耗低的嵌入式網絡化智能傳感器繫統。傳感器繫統的主控芯片 LPC11C24以CANopen標準為基礎提供多種 API接口,可將 LPC11C24快速整閤至嵌入式網絡應用中。在基于 QT設計的上位機界麵上可方便地完成CAN總線網絡上多點傳感器的管理與配置。測試結果錶明,傳感器繫統實現瞭體積小、功耗低、性價比高、功能彊和便于擴展的設計目標,加快瞭智能傳感器的開髮與應用。
침대현유전감기체적대、공모대、성개비저등불족,이편내ROM정합CANopen구동기적LPC11C24저공모미처리기화기우 QT설계적상위궤위핵심,채용CAN총선기술,설계료체적소、공모저적감입식망락화지능전감기계통。전감기계통적주공심편 LPC11C24이CANopen표준위기출제공다충 API접구,가장 LPC11C24쾌속정합지감입식망락응용중。재기우 QT설계적상위궤계면상가방편지완성CAN총선망락상다점전감기적관리여배치。측시결과표명,전감기계통실현료체적소、공모저、성개비고、공능강화편우확전적설계목표,가쾌료지능전감기적개발여응용。
Aiming at the demerit of current intelligent sensor network with large size,high power and low quality,an embed-ded network smart sensor system with the upper computer in the on-chip ROM integration CANopen LPC11C24 low power microprocessor of the drive and QT is designed with the characteristic of small size,low power.The sensor network with CANopen standard-based offers multiple API interface and integrates LPC11C24 into the embedded network application. Based on the QT design PC interface can complete the CAN bus network management and configuration of multiple point sensor.The testing results show that the sensor network accomplishes the design goal of small size,low power,cost-effec-tive principle,expandability and speeds up the development and application of intelligent sensor.