煤矿机械
煤礦機械
매광궤계
Coal Mine Machinery
2015年
9期
5-6,7
,共3页
王耀辉%毛德兵%范志忠%徐刚%徐琦
王耀輝%毛德兵%範誌忠%徐剛%徐琦
왕요휘%모덕병%범지충%서강%서기
急倾斜煤层%刨运机组%推移机构%有限元分析
急傾斜煤層%鑤運機組%推移機構%有限元分析
급경사매층%포운궤조%추이궤구%유한원분석
steep coal seam%plough and convey machine%pushing mechanism%finite element analysis
为实现急倾斜薄煤层刨运机组的机械化开采,依据采煤工艺,提出了和刨运机组配套的推移机构的方案。该方案满足了薄煤层的过人空间,并为刨运机刨煤提供可靠动力。根据实际需要,设计了推移千斤顶和摇摆千斤顶的结构,计算出2种千斤顶的推力和拉力。利用三维建模软件建立推移机构实体模型,对实体模型进行强度有限元分析,分析结果表明,推移机构所受最大应力为253.4 MPa,安全系数超过1.2倍,最大变形量为1.181 mm,变形量较小。
為實現急傾斜薄煤層鑤運機組的機械化開採,依據採煤工藝,提齣瞭和鑤運機組配套的推移機構的方案。該方案滿足瞭薄煤層的過人空間,併為鑤運機鑤煤提供可靠動力。根據實際需要,設計瞭推移韆斤頂和搖襬韆斤頂的結構,計算齣2種韆斤頂的推力和拉力。利用三維建模軟件建立推移機構實體模型,對實體模型進行彊度有限元分析,分析結果錶明,推移機構所受最大應力為253.4 MPa,安全繫數超過1.2倍,最大變形量為1.181 mm,變形量較小。
위실현급경사박매층포운궤조적궤계화개채,의거채매공예,제출료화포운궤조배투적추이궤구적방안。해방안만족료박매층적과인공간,병위포운궤포매제공가고동력。근거실제수요,설계료추이천근정화요파천근정적결구,계산출2충천근정적추력화랍력。이용삼유건모연건건립추이궤구실체모형,대실체모형진행강도유한원분석,분석결과표명,추이궤구소수최대응력위253.4 MPa,안전계수초과1.2배,최대변형량위1.181 mm,변형량교소。
For the realization of mechanized mining of plough and convey machine in steeply-inclined thin coal seam, according to the coal winning technology, the scheme of the pushing mechanism of the machine was put forward. The scheme could meet man space of the thin coal seam, and for plough and convey machine caould provide reliable power. According to the actual needs, the structure of the pushing jack and lifting jack was designed, and the thrust and pull of the two jacks were calculated. Entity model was established with three-dimensional modeling, and strength finite element analysis was carried out on the solid model. The analysis results showed that by the maximum stress 253.4 MPa, stress safety factor of the pushing mechanism was more than 1.2 times, and by the maximum deformation 1.181 mm, deformation was small.