机床与液压
機床與液壓
궤상여액압
Machine Tool & Hydraulics
2015年
16期
39-43
,共5页
涂志标%任巨涛%郑宝增%马红亮
塗誌標%任巨濤%鄭寶增%馬紅亮
도지표%임거도%정보증%마홍량
立铣刀%螺旋角度%切削性能%DEFROM-3D仿真%表面光洁度
立鐉刀%螺鏇角度%切削性能%DEFROM-3D倣真%錶麵光潔度
립선도%라선각도%절삭성능%DEFROM-3D방진%표면광길도
Vertical milling cutter%Spiral angle%Cutting performance%DEFROM-3D simulation%Surface roughness
主要介绍在特定的铣削条件下,不同螺旋角度铣刀如何影响其切削性能。先利用DEFORM软件仿真不同螺旋角度立铣刀的铣削过程,得到了切削力变化曲线,从切削力大小变化来分析铣刀的切削性能。接着进行实体铣削实验,用不同螺旋角度铣刀铣削不同材质的工件,除了螺旋角度外,其他的参数如前后角等规定统一,铣削完后观察不同螺旋角度的铣刀对已铣削工件表面粗糙度的影响,并记录数据。最后对比两者数据,分析得出螺旋角度越大切削力越小、工件表面越光滑的结论。
主要介紹在特定的鐉削條件下,不同螺鏇角度鐉刀如何影響其切削性能。先利用DEFORM軟件倣真不同螺鏇角度立鐉刀的鐉削過程,得到瞭切削力變化麯線,從切削力大小變化來分析鐉刀的切削性能。接著進行實體鐉削實驗,用不同螺鏇角度鐉刀鐉削不同材質的工件,除瞭螺鏇角度外,其他的參數如前後角等規定統一,鐉削完後觀察不同螺鏇角度的鐉刀對已鐉削工件錶麵粗糙度的影響,併記錄數據。最後對比兩者數據,分析得齣螺鏇角度越大切削力越小、工件錶麵越光滑的結論。
주요개소재특정적선삭조건하,불동라선각도선도여하영향기절삭성능。선이용DEFORM연건방진불동라선각도립선도적선삭과정,득도료절삭력변화곡선,종절삭력대소변화래분석선도적절삭성능。접착진행실체선삭실험,용불동라선각도선도선삭불동재질적공건,제료라선각도외,기타적삼수여전후각등규정통일,선삭완후관찰불동라선각도적선도대이선삭공건표면조조도적영향,병기록수거。최후대비량자수거,분석득출라선각도월대절삭력월소、공건표면월광활적결론。
It was introduced that how milling cutters with different spiral angle influenced its cutting performance in particular milling conditions. DEFORM software was used to simulate milling processes of vertical milling cutters with different spiral angle and cutting force curves were gotten. The cutting performances of the cutters were analyzed according to the change of the cutting force. Then entity milling experiments were made, milling cutters with different spiral angle were used to mill workpieces with different material. In addition to the spiral angle, other parameters such as front angle and back angle were unified. After milling, the influences of the mill?ing cutter with different spiral angle on the workpiece surface roughness were observed and the data were recorded. Through comparing the data, the conclusion is that the helical angle is more big, the cutting force is less smaller, the surface of the workpiece is more smoother.