CAJ | 학술논문

分析工程机械轮胎罐式胶囊硫化模具过梁处内压水泄漏(简称内漏)产生的原因,并提出相应的解决措施.通过优化过梁与模具连接、合理设计过梁受力、优化模具密封结构及过梁结构,罐式胶囊硫化模具过梁处内漏问题得到有效解决,轮胎硫化质量提高.
분석공정궤계륜태관식효낭류화모구과량처내압수설루(간칭내루)산생적원인,병제출상응적해결조시.통과우화과량여모구련접、합리설계과량수력、우화모구밀봉결구급과량결구,관식효낭류화모구과량처내루문제득도유효해결,륜태류화질량제고.
In this study, the root causes of leakage of pressurized water from OTR tire curing bladder mold beam were analyzed, and corrective actions were presented accordingly. Based on the analysis, the joint of beam and mold was optimized, the beam stress was adjusted, and the mold sealing structure and beam structure were also modiifed. After the modiifcation, the water leakage issue was effectively resolved and tire curing quality was improved.