城市交通
城市交通
성시교통
Urban Transport of China
2015年
4期
65-69
,共5页
道路平面交叉口%规范%交通分析%设计流程%几何线型
道路平麵交扠口%規範%交通分析%設計流程%幾何線型
도로평면교차구%규범%교통분석%설계류정%궤하선형
at-grade intersection%specification%traffic analysis%design process%layout design
《重庆市城镇道路平面交叉口设计规范》(DBJ 50/T178—2014)于2014年5月1日起施行,用以规范指导重庆市道路平面交叉口设计工作。《规范》编制遵循以人为本,因地制宜,公交优先,规划、设计、管理一体化的指导原则。《规范》的创新之处包括:根据建成区环境和地形特征执行有差异的设计标准以适应实地环境、避免过度建设;明确平面交叉口选型的考虑因素和选型办法;细化交叉口视距三角形停车视距等。此外,《规范》还详细规定了设计车型、行人过街设施、路缘石转弯半径、无障碍过街设施、公交站台长度等内容。
《重慶市城鎮道路平麵交扠口設計規範》(DBJ 50/T178—2014)于2014年5月1日起施行,用以規範指導重慶市道路平麵交扠口設計工作。《規範》編製遵循以人為本,因地製宜,公交優先,規劃、設計、管理一體化的指導原則。《規範》的創新之處包括:根據建成區環境和地形特徵執行有差異的設計標準以適應實地環境、避免過度建設;明確平麵交扠口選型的攷慮因素和選型辦法;細化交扠口視距三角形停車視距等。此外,《規範》還詳細規定瞭設計車型、行人過街設施、路緣石轉彎半徑、無障礙過街設施、公交站檯長度等內容。
《중경시성진도로평면교차구설계규범》(DBJ 50/T178—2014)우2014년5월1일기시행,용이규범지도중경시도로평면교차구설계공작。《규범》편제준순이인위본,인지제의,공교우선,규화、설계、관리일체화적지도원칙。《규범》적창신지처포괄:근거건성구배경화지형특정집행유차이적설계표준이괄응실지배경、피면과도건설;명학평면교차구선형적고필인소화선형판법;세화교차구시거삼각형정차시거등。차외,《규범》환상세규정료설계차형、행인과가설시、로연석전만반경、무장애과가설시、공교참태장도등내용。
Urban Roadway At-grade Intersection Design Standardin Chongqing(DBJ 50/T178—2014) has been implemented since May 1st, 2014, which provides the guidance for urban intersections design in Chongqing. This paper explains the principles of the standard, including public transit priority, and integra-tion of planning, design and management. The paper summarizes the innovative ideas in the specification as follows: adopting context sensitive design standard according to the environment and terrain of urban built-up area to avoid excessive construction, identifying the influential factors on the selection of intersec-tion layout and the method, adjusting the standard of stopping sight distance at intersections, and etc. Fur-thermore, the specification also defines the designed vehicle type, pedestrian crossing facilities, turning ra-dius of curb, obstacle-free crossing facilities, and length of bus stops in detail.