传感技术学报
傳感技術學報
전감기술학보
Chinese Journal of Sensors and Actuators
2015年
9期
1321-1327
,共7页
杨志才%石云波%董胜飞%陈艳香%智丹%王艳阳
楊誌纔%石雲波%董勝飛%陳豔香%智丹%王豔暘
양지재%석운파%동성비%진염향%지단%왕염양
加速度计%霍普金森杆%动态线性%ANSYS/LS-DYNA%测试
加速度計%霍普金森桿%動態線性%ANSYS/LS-DYNA%測試
가속도계%곽보금삼간%동태선성%ANSYS/LS-DYNA%측시
ccelerometer%hopkinson bar%dynamic linearity%ANSYS/LS-DYNA%measurement
基于一维应力波传播理论和弹性波叠加原理,设计了双弹头霍普金森杆校准装置,用以实现精确标定高g值加速度计的动态线性参数.利用ANSYS/LS-DYNA有限元仿真软件对双弹头霍普金森杆进行了数值模拟;分析了子弹材料、垫片材料、垫片厚度对加速度激励波形的影响,并结合以上三种因素对内、外弹单独撞击产生的加速度叠加曲线与两弹同时撞击产生的加速度曲线的一致性进行了分析;最终,通过试验验证了双弹头霍普金森杆校准装置测量加速度计动态线性参数的可行性.
基于一維應力波傳播理論和彈性波疊加原理,設計瞭雙彈頭霍普金森桿校準裝置,用以實現精確標定高g值加速度計的動態線性參數.利用ANSYS/LS-DYNA有限元倣真軟件對雙彈頭霍普金森桿進行瞭數值模擬;分析瞭子彈材料、墊片材料、墊片厚度對加速度激勵波形的影響,併結閤以上三種因素對內、外彈單獨撞擊產生的加速度疊加麯線與兩彈同時撞擊產生的加速度麯線的一緻性進行瞭分析;最終,通過試驗驗證瞭雙彈頭霍普金森桿校準裝置測量加速度計動態線性參數的可行性.
기우일유응력파전파이론화탄성파첩가원리,설계료쌍탄두곽보금삼간교준장치,용이실현정학표정고g치가속도계적동태선성삼수.이용ANSYS/LS-DYNA유한원방진연건대쌍탄두곽보금삼간진행료수치모의;분석료자탄재료、점편재료、점편후도대가속도격려파형적영향,병결합이상삼충인소대내、외탄단독당격산생적가속도첩가곡선여량탄동시당격산생적가속도곡선적일치성진행료분석;최종,통과시험험증료쌍탄두곽보금삼간교준장치측량가속도계동태선성삼수적가행성.
Based on one-dimension stress wave theory and superposition theory of elastic waves,designed a Dual Warhead Hopkinson bar to demarcate the dynamic linear parameters of high g micro accelerometer accurately. A fi-nite element model for Hopkinson bar calibration system was created,ANSYS/LS-DYNA was employed to simulate the operation process of Hopkinson bar,and the effects of the projectile′s materials,adjustment pads materials and thickness on the acceleration waveform were found.And combination of these three factors,we have analyzed the consistency about when two bullets hit Hopkinson bar respectively,produce the superimposed curve and when they impact Hopkinson bar at the same time,produce the curve;ultimately,verifying its feasibility that used calibration device of dual warhead Hopkinson bar to measure dynamic linear parameters of high g micro accelerometer.