兵工自动化
兵工自動化
병공자동화
Ordnance Industry Automation
2015年
9期
35-39
,共5页
动作可靠性%参数化%尺寸链%优化设计
動作可靠性%參數化%呎吋鏈%優化設計
동작가고성%삼수화%척촌련%우화설계
action reliability%parameterize%size chain%optimized designed
针对机构在运动情况下会出现运动功能失效的问题,提出一种以尺寸链为约束的机构动作可靠性优化方法。以某型号冲锋枪的发射机构为例,通过对机构动作的分析,建立动力学仿真的参数化模型,同时采用蒙特卡罗随机抽样法得到运动仿真样本值,在动力学仿真软件 ADAMS 中模拟仿真。根据模拟仿真试验,计算出正交试验表中每组参数所对应的动作可靠度,并通过对正交试验结果的优化,并综合考虑尺寸链约束的要求,优化设计出更加有效的参数。仿真结果表明:优化后的动作可靠度为0.998,该方法既满足动作可靠性要求,又满足尺寸链要求的参数值,使机构动作可靠度得到了提高。
針對機構在運動情況下會齣現運動功能失效的問題,提齣一種以呎吋鏈為約束的機構動作可靠性優化方法。以某型號遲鋒鎗的髮射機構為例,通過對機構動作的分析,建立動力學倣真的參數化模型,同時採用矇特卡囉隨機抽樣法得到運動倣真樣本值,在動力學倣真軟件 ADAMS 中模擬倣真。根據模擬倣真試驗,計算齣正交試驗錶中每組參數所對應的動作可靠度,併通過對正交試驗結果的優化,併綜閤攷慮呎吋鏈約束的要求,優化設計齣更加有效的參數。倣真結果錶明:優化後的動作可靠度為0.998,該方法既滿足動作可靠性要求,又滿足呎吋鏈要求的參數值,使機構動作可靠度得到瞭提高。
침대궤구재운동정황하회출현운동공능실효적문제,제출일충이척촌련위약속적궤구동작가고성우화방법。이모형호충봉창적발사궤구위례,통과대궤구동작적분석,건립동역학방진적삼수화모형,동시채용몽특잡라수궤추양법득도운동방진양본치,재동역학방진연건 ADAMS 중모의방진。근거모의방진시험,계산출정교시험표중매조삼수소대응적동작가고도,병통과대정교시험결과적우화,병종합고필척촌련약속적요구,우화설계출경가유효적삼수。방진결과표명:우화후적동작가고도위0.998,해방법기만족동작가고성요구,우만족척촌련요구적삼수치,사궤구동작가고도득도료제고。
For mechanism will appear movement function failure in motion, an optimal design method of mechanism action reliability is proposed, with the constraints of size chain. A submachine gun firing mechanism is taken as an example for the study. The mechanism parametric model is established on ADAMS before the mechanism is studied. Owning to the applying of the Monte-Carlo method, the sample values of active simulation is got. The mechanism is simulated in the dynamics simulation software ADAMS. And then the action reliability of each set of parameters can be got due to the outcome of the simulations. The parameters are designed by the method of orthogonal experiment. Taking the consideration of the size chain constraints, more effective parameter value is optimized designed. The simulation results show that the action reliability of optimized model is 0.998, which proves that this method not only meets both requirements of the action reliability and the constraints of size chain, but also improves the action reliability of the mechanism.