理化检验-物理分册
理化檢驗-物理分冊
이화검험-물리분책
Physical Testing and Chemical Analysis Part A:Physical Testing
2015年
10期
740-742
,共3页
连接片%黄铜%镀金%湿热试验%腐蚀
連接片%黃銅%鍍金%濕熱試驗%腐蝕
련접편%황동%도금%습열시험%부식
contact block%copper%Au plating%humid heat test%corrosion
针对某电池包连接器镀金黄铜连接片在湿热试验过程中发生腐蚀的现象,从连接片材料、电池包工艺设计等方面进行了分析。结果表明:连接片发生腐蚀主要是由于其表面镀层质量差,局部甚至漏镀,且厚度不足;电池包设计时连接片与电池正极之间存在电位差进一步加速了连接片的腐蚀;另外,电池包的封装胶水在高温高湿环境下可能释放出含磷酸类物质从而诱发连接片的腐蚀。最后针对上述原因对连接器的质量控制提出了系列建议。
針對某電池包連接器鍍金黃銅連接片在濕熱試驗過程中髮生腐蝕的現象,從連接片材料、電池包工藝設計等方麵進行瞭分析。結果錶明:連接片髮生腐蝕主要是由于其錶麵鍍層質量差,跼部甚至漏鍍,且厚度不足;電池包設計時連接片與電池正極之間存在電位差進一步加速瞭連接片的腐蝕;另外,電池包的封裝膠水在高溫高濕環境下可能釋放齣含燐痠類物質從而誘髮連接片的腐蝕。最後針對上述原因對連接器的質量控製提齣瞭繫列建議。
침대모전지포련접기도금황동련접편재습열시험과정중발생부식적현상,종련접편재료、전지포공예설계등방면진행료분석。결과표명:련접편발생부식주요시유우기표면도층질량차,국부심지루도,차후도불족;전지포설계시련접편여전지정겁지간존재전위차진일보가속료련접편적부식;령외,전지포적봉장효수재고온고습배경하가능석방출함린산류물질종이유발련접편적부식。최후침대상술원인대련접기적질량공제제출료계렬건의。
For the corrosion phenomenon of a batch of battery pack connector Au-plated copper contact blocks during humid heat test,a variety of inspection and analysis on the material and manufacture design of the contact blocks were conducted.The results show the corrosion of the contact blocks was mainly because the surface plating quality was poor with local skip plating and insufficient thickness.Furthermore,the potential difference between the contact block and the anode accelerated the corrosion.Beside,the phosphoric acid released from the packaging gule under the environment of high temperature and high humidity,would also induce the corrosion of the contact blocks.Finally,a series of quality control suggestions of the contactor were proposed according to above reasons.