理化检验-物理分册
理化檢驗-物理分冊
이화검험-물리분책
Physical Testing and Chemical Analysis Part A:Physical Testing
2015年
10期
693-697,700
,共6页
向前%方泽民%黄双
嚮前%方澤民%黃雙
향전%방택민%황쌍
冲剪应力%比总损耗%磁极化强度%织构%消除应力退火
遲剪應力%比總損耗%磁極化彊度%織構%消除應力退火
충전응력%비총손모%자겁화강도%직구%소제응력퇴화
shearing stress%specific total loss%magnetic polarization%texture%stress relief annealing
对电机铁芯在冲剪加工过程中由于加工尺寸的减小而带来铁芯磁性能的恶化程度进行了量化，并进一步探讨了磁性能恶化的内部成因，包括宏观上冲剪面形貌的变化和内部织构的变化。结果表明：在制造电机铁芯时，需对铁芯齿部宽度小于15 mm 的样片进行消除应力退火。
對電機鐵芯在遲剪加工過程中由于加工呎吋的減小而帶來鐵芯磁性能的噁化程度進行瞭量化，併進一步探討瞭磁性能噁化的內部成因，包括宏觀上遲剪麵形貌的變化和內部織構的變化。結果錶明：在製造電機鐵芯時，需對鐵芯齒部寬度小于15 mm 的樣片進行消除應力退火。
대전궤철심재충전가공과정중유우가공척촌적감소이대래철심자성능적악화정도진행료양화，병진일보탐토료자성능악화적내부성인，포괄굉관상충전면형모적변화화내부직구적변화。결과표명：재제조전궤철심시，수대철심치부관도소우15 mm 적양편진행소제응력퇴화。
The deterioration level of the magnetic properties of motor iron core due to its size reduction after punching was quantified.The internal causes for the magnetic property deterioration,including the changes of shearing surface and internal texture,were researched.The results show that during the manufacture of the iron cores,stress relief annealing should be done when the width of core tooth is less than 1 5 mm.
