CAJ | 학술논문

直引线器件是目前高可靠性产品中使用较多的一种封装形式，需要对其进行二次成形处理，而成形过程对PCB焊盘设计、成形工艺的掌控以及设备的状态提出了较高的要求，因此有必要对器件的引线成形工艺过程进行系统的归纳和总结。介绍了“Manix FP”系列单边可调双工位集成电路引线成形设备的结构组成及工作原理，分析和总结了设备在使用过程中应关注的工艺要点，设计了专用的核算软件，对成形的尺寸参数进行预先评估，确保成形质量。
직인선기건시목전고가고성산품중사용교다적일충봉장형식，수요대기진행이차성형처리，이성형과정대PCB한반설계、성형공예적장공이급설비적상태제출료교고적요구，인차유필요대기건적인선성형공예과정진행계통적귀납화총결。개소료“Manix FP”계렬단변가조쌍공위집성전로인선성형설비적결구조성급공작원리，분석화총결료설비재사용과정중응관주적공예요점，설계료전용적핵산연건，대성형적척촌삼수진행예선평고，학보성형질량。
Straight lead device is a kind of package widely used in the products of high reliability at present, but it needs to be formed by another process, and the forming process needs higher requirements on PCB pad design, process control and process equipment. So it is necessary to conclude and summarize about lead-forming process of the device. Describe the structure and working principle of equipment about the mould of Manix FP series of adjustable single side and double station, analyze and summarize the key point that should pay attention in the process, design a special software to pre-evaluate the formation size, ensure the forming quality.