建筑节能
建築節能
건축절능
Building Energy EFFICIENCY
2015年
10期
33-35,84
,共4页
叶庭乔%谭军毅%罗多%李建莹%马世歌
葉庭喬%譚軍毅%囉多%李建瑩%馬世歌
협정교%담군의%라다%리건형%마세가
热平衡%设计校核%太阳能系统%性能分析
熱平衡%設計校覈%太暘能繫統%性能分析
열평형%설계교핵%태양능계통%성능분석
heat balance%design and verification%solar system%performance analysis
以基于热平衡设计校核的太阳能系统热性能分析为目的，将珠海兴业绿色建筑科技有限公司研制的高性能平板集热器应用于公司总部楼顶，以太阳能集热小系统为测试对象，进行数据采集，并根据实验结果进行性能分析，工况点终止温度的计算值与实验值平均偏差率为2.77%。在允许的工程误差范围内，可以作为太阳能建筑一体化热水系统及大型太阳能集中供热系统的指导算法，从而达到简化热性能分析的目的。
以基于熱平衡設計校覈的太暘能繫統熱性能分析為目的，將珠海興業綠色建築科技有限公司研製的高性能平闆集熱器應用于公司總部樓頂，以太暘能集熱小繫統為測試對象，進行數據採集，併根據實驗結果進行性能分析，工況點終止溫度的計算值與實驗值平均偏差率為2.77%。在允許的工程誤差範圍內，可以作為太暘能建築一體化熱水繫統及大型太暘能集中供熱繫統的指導算法，從而達到簡化熱性能分析的目的。
이기우열평형설계교핵적태양능계통열성능분석위목적，장주해흥업록색건축과기유한공사연제적고성능평판집열기응용우공사총부루정，이태양능집열소계통위측시대상，진행수거채집，병근거실험결과진행성능분석，공황점종지온도적계산치여실험치평균편차솔위2.77%。재윤허적공정오차범위내，가이작위태양능건축일체화열수계통급대형태양능집중공열계통적지도산법，종이체도간화열성능분석적목적。
The heat balance calculation of design and verification was used to analyze the thermal performance in solar systems. In our experiment, high performance flat solar thermal collectors (made by Zhuhai Sinyes Green Buiteling Technology CO., Ltd.) were installed on the rooftop of our factory building. The experimental results were compared with the calculated values based on heat balance calculation of design and verification method. The average standard deviation of the operating point temperatures between the calculated and experimental results was 2.77%, which is within the acceptable range of engineering error. Hence, the calculation method can be used as a theoretical algorithm guidance for building integrated solar hot water systems and large central solar heating supply systems to simplify the analysis of system thermal performance.
