模具工业
模具工業
모구공업
Die & Mould Industry
2015年
8期
40-44
,共5页
云岗%祝铁丽%王凯%刘永云
雲崗%祝鐵麗%王凱%劉永雲
운강%축철려%왕개%류영운
微流控芯片%超声振动%注射成型%模具设计
微流控芯片%超聲振動%註射成型%模具設計
미류공심편%초성진동%주사성형%모구설계
microfluidic chips%ultrasonic vibration%injection forming%mould design
以微流控芯片为研究对象,分析了不同作用方向和作用形式的超声振动对注射成型微结构制品的成型质量影响机理,提出了将整体作用式的超声振动引入到注射模中,并设计了包含2种不同振动方向的超声辅助成型模,进行了2种型腔振动方向对注射制品微结构成型质量影响的对比研究.通过对分型面、浇注系统、排气系统和脱模系统的设计,系统地介绍了超声整体作用式注射模的设计要点.
以微流控芯片為研究對象,分析瞭不同作用方嚮和作用形式的超聲振動對註射成型微結構製品的成型質量影響機理,提齣瞭將整體作用式的超聲振動引入到註射模中,併設計瞭包含2種不同振動方嚮的超聲輔助成型模,進行瞭2種型腔振動方嚮對註射製品微結構成型質量影響的對比研究.通過對分型麵、澆註繫統、排氣繫統和脫模繫統的設計,繫統地介紹瞭超聲整體作用式註射模的設計要點.
이미류공심편위연구대상,분석료불동작용방향화작용형식적초성진동대주사성형미결구제품적성형질량영향궤리,제출료장정체작용식적초성진동인입도주사모중,병설계료포함2충불동진동방향적초성보조성형모,진행료2충형강진동방향대주사제품미결구성형질량영향적대비연구.통과대분형면、요주계통、배기계통화탈모계통적설계,계통지개소료초성정체작용식주사모적설계요점.