制造业自动化
製造業自動化
제조업자동화
Manufacturing Automation
2015年
19期
63-66
,共4页
黄泽好%袁光亮%谭章麒%刘通
黃澤好%袁光亮%譚章麒%劉通
황택호%원광량%담장기%류통
消声器%锥管%传声损失%气流再生噪声
消聲器%錐管%傳聲損失%氣流再生譟聲
소성기%추관%전성손실%기류재생조성
基于声学有限元法与流体力学混合仿真方法,探索内插锥管对扩张室消声器传声损失和气流再生噪声的影响。结果表明:锥管的方向对其传声损失没有影响;锥度变化对截止频率处的传声损失有影响;锥管长度的影响与锥度有关,大锥度锥管长度将影响内插管对扩张室消声器消除部分通过频率的效果。同时,反流内插锥管比直内插管扩张室消声器的流体再生噪声平均小10dB左右。
基于聲學有限元法與流體力學混閤倣真方法,探索內插錐管對擴張室消聲器傳聲損失和氣流再生譟聲的影響。結果錶明:錐管的方嚮對其傳聲損失沒有影響;錐度變化對截止頻率處的傳聲損失有影響;錐管長度的影響與錐度有關,大錐度錐管長度將影響內插管對擴張室消聲器消除部分通過頻率的效果。同時,反流內插錐管比直內插管擴張室消聲器的流體再生譟聲平均小10dB左右。
기우성학유한원법여류체역학혼합방진방법,탐색내삽추관대확장실소성기전성손실화기류재생조성적영향。결과표명:추관적방향대기전성손실몰유영향;추도변화대절지빈솔처적전성손실유영향;추관장도적영향여추도유관,대추도추관장도장영향내삽관대확장실소성기소제부분통과빈솔적효과。동시,반류내삽추관비직내삽관확장실소성기적류체재생조성평균소10dB좌우。