中医临床研究
中醫臨床研究
중의림상연구
Clinical Journal of Chinese Medicine
2015年
26期
6-9
,共4页
任燕%田源%黄明进%罗春丽
任燕%田源%黃明進%囉春麗
임연%전원%황명진%라춘려
三七吴茱萸滴丸%制备工艺%HPLC
三七吳茱萸滴汍%製備工藝%HPLC
삼칠오수유적환%제비공예%HPLC
The Fufang Sanqi Wuzhuyu Wan%Forming techniques%HPLC
目的:探索复方三七吴茱萸滴丸的制备工艺。方法:通过三七吴茱萸滴丸制备实验,用单因素和正交实验的方法,以滴丸的成型性、圆整度、硬度、重量差异、崩解时限为筛选指标,以基质的选择、药物与基质的配比、药液的保温温度、冷凝剂、冷凝剂的温度、滴头内外径大小、滴距、滴制速度为主要考察因素,对三七吴茱萸滴丸的制备工艺进行优选,并用 HPLC 法对最佳的优选结果进行含量测定。结果:基质为PEG4000:PEG6000=3∶1,药物与基质的最佳配比为1∶5,滴制温度为80℃,冷凝剂为甲基硅油,冷凝剂温度为12℃,滴头内外径大小为3.7/4.4mm,滴距为20cm,滴速为40滴/min,用HPLC法测定三七吴茱萸滴丸中三七皂苷R1、吴茱萸次碱的含量分别为:0.578%、9.429×10-3%。结论:该工艺制备的滴丸的成型效果最佳。
目的:探索複方三七吳茱萸滴汍的製備工藝。方法:通過三七吳茱萸滴汍製備實驗,用單因素和正交實驗的方法,以滴汍的成型性、圓整度、硬度、重量差異、崩解時限為篩選指標,以基質的選擇、藥物與基質的配比、藥液的保溫溫度、冷凝劑、冷凝劑的溫度、滴頭內外徑大小、滴距、滴製速度為主要攷察因素,對三七吳茱萸滴汍的製備工藝進行優選,併用 HPLC 法對最佳的優選結果進行含量測定。結果:基質為PEG4000:PEG6000=3∶1,藥物與基質的最佳配比為1∶5,滴製溫度為80℃,冷凝劑為甲基硅油,冷凝劑溫度為12℃,滴頭內外徑大小為3.7/4.4mm,滴距為20cm,滴速為40滴/min,用HPLC法測定三七吳茱萸滴汍中三七皂苷R1、吳茱萸次堿的含量分彆為:0.578%、9.429×10-3%。結論:該工藝製備的滴汍的成型效果最佳。
목적:탐색복방삼칠오수유적환적제비공예。방법:통과삼칠오수유적환제비실험,용단인소화정교실험적방법,이적환적성형성、원정도、경도、중량차이、붕해시한위사선지표,이기질적선택、약물여기질적배비、약액적보온온도、냉응제、냉응제적온도、적두내외경대소、적거、적제속도위주요고찰인소,대삼칠오수유적환적제비공예진행우선,병용 HPLC 법대최가적우선결과진행함량측정。결과:기질위PEG4000:PEG6000=3∶1,약물여기질적최가배비위1∶5,적제온도위80℃,냉응제위갑기규유,냉응제온도위12℃,적두내외경대소위3.7/4.4mm,적거위20cm,적속위40적/min,용HPLC법측정삼칠오수유적환중삼칠조감R1、오수유차감적함량분별위:0.578%、9.429×10-3%。결론:해공예제비적적환적성형효과최가。
Objective: To explore the best forming techniques for the Fufang Sanqi Wuzhuyu Wan. Methods: By single factor and orthogonal test, the formations, roundness, hardness, weight variation, the disintegration time of Sanqi Wuzhuyu Wan were selected as the screening index; and the type of base material, the temperature of physic liquor, the ratio of drug to base material, the type of the cooling agent, the temperature of the cooling agent, the diameters of dropper, the distance, the speed were selected as the main factors; the best forming techniques for the Fufang Sanqi Wuzhuyu Wan was selected. Then HPLC was used to determine the content of the best optimized results. Results: The ratio of base material (PEG4000∶PEG6000) was 3∶1, the ratio of drug to base material was 1∶5, the temperature of drug solution was 80℃, the cooling agent was methyl silicone oil, the temperature of the cooling agent was 12℃, the diameters of dropper was 3.7/4.4 mm, the distance was 20cm,the speed was 40 drops per min. The content of notoginsenoside R1 and rutaecarpine in the Fufang Sanqi Wuzhuyu Wan was 0.578% and 9.429×10-3%. Conclusion: The preparation method was the optimum forming condition.