装备环境工程
裝備環境工程
장비배경공정
Equipment Environmental Engineering
2015年
5期
88-94
,共7页
离心机转盘/转臂工程结构%离心载荷%温度载荷
離心機轉盤/轉臂工程結構%離心載荷%溫度載荷
리심궤전반/전비공정결구%리심재하%온도재하
centrifuge plate/arm structure%centrifugal load%temperature load
目的:研究不同转盘/转臂结构在离心载荷和温度载荷作用下的变形。方法在充分调研国内外相关研究的基础上,分析几种转盘/转臂给定工程结构在离心载荷和温度载荷作用下的变形规律。结果通过分析可以得到,不同转盘/转臂结构随离心载荷的增大变形增大,随温度的正向变化变形量增大,随温度的负向变化变形量负向减小。结论同等载荷作用下的变形量主要由该种结构形式转盘/转臂材料分布决定。对比几种转盘/转臂结构可以看出,锥形辐射式加强筋转盘综合承载能力较优,可为工程选用。
目的:研究不同轉盤/轉臂結構在離心載荷和溫度載荷作用下的變形。方法在充分調研國內外相關研究的基礎上,分析幾種轉盤/轉臂給定工程結構在離心載荷和溫度載荷作用下的變形規律。結果通過分析可以得到,不同轉盤/轉臂結構隨離心載荷的增大變形增大,隨溫度的正嚮變化變形量增大,隨溫度的負嚮變化變形量負嚮減小。結論同等載荷作用下的變形量主要由該種結構形式轉盤/轉臂材料分佈決定。對比幾種轉盤/轉臂結構可以看齣,錐形輻射式加彊觔轉盤綜閤承載能力較優,可為工程選用。
목적:연구불동전반/전비결구재리심재하화온도재하작용하적변형。방법재충분조연국내외상관연구적기출상,분석궤충전반/전비급정공정결구재리심재하화온도재하작용하적변형규률。결과통과분석가이득도,불동전반/전비결구수리심재하적증대변형증대,수온도적정향변화변형량증대,수온도적부향변화변형량부향감소。결론동등재하작용하적변형량주요유해충결구형식전반/전비재료분포결정。대비궤충전반/전비결구가이간출,추형복사식가강근전반종합승재능력교우,가위공정선용。
ABSTRACT:Objective To study the variation of different plate/arm structures under centrifugal and temperature loads. Methods Based on the study of domestic and overseas literatures, this paper analyzed several kinds of variation patterns of plate/arm structure under the centrifugal load and the temperature load. Results The results showed the variation of different plate/arm structures were enlarged when the centrifugal load increased and the variation was increased along with the positive temperature changing and decreased along with the negative temperature changing. Conclusion Under the same loading, the variation of the plate/arm depends on material distribution. The comparison of several kinds of the structure of the plate/arm shows the comprehensive carrying capacity of the conical ribbed plate is better, and this structure could be used for engineering.