CAJ | 학술논문

复合材料压裂桥塞是水平井泵送桥塞分段压裂工艺技术的核心工具之一。根据水平井泵送桥塞分段压裂工艺技术原理，进行桥塞的结构和技术参数设计，并对其零部件进行受力分析，得到了可钻桥塞坐封脱手和压裂这2种极限工况下材料的最小屈服强度，据此确定除了卡瓦、悬挂套和挡环采用铸铁材料外，桥塞的其他零部件均采用低密度复合材料。通过对关键零部件（固定销钉、心轴和套筒、卡瓦基体和卡瓦片）的测试，对桥塞的心轴和套筒、卡瓦基体和卡瓦片进行改进。最后对桥塞的地面泵送和井下磨铣进行测试，测试结果表明，桥塞的各项性能均达到现场应用要求。
복합재료압렬교새시수평정빙송교새분단압렬공예기술적핵심공구지일。근거수평정빙송교새분단압렬공예기술원리，진행교새적결구화기술삼수설계，병대기령부건진행수력분석，득도료가찬교새좌봉탈수화압렬저2충겁한공황하재료적최소굴복강도，거차학정제료잡와、현괘투화당배채용주철재료외，교새적기타령부건균채용저밀도복합재료。통과대관건령부건（고정소정、심축화투통、잡와기체화잡와편）적측시，대교새적심축화투통、잡와기체화잡와편진행개진。최후대교새적지면빙송화정하마선진행측시，측시결과표명，교새적각항성능균체도현장응용요구。
Composite bridge plug is one of the key tools for staged fracturing technique by pumping bridge plug in horizontal wells?According to principle of horizontal well staged fracturing by pumping bridge plug, the structure and the technical specifications of the bridge plug have been designed?Stress analyses on the bridge plug parts have obtained the minimum material yield strength under limited conditions, based on which it is determined that the slips, hanging sleeve and baffle ring are made of cast iron, while other parts are made of low?density com?posites?Testing on the key components ( fixed pin, mandrel and sleeve, slip body and slip sheet) helps the im?provement of the bridge plug mandrel and sleeve, slip body and slip sheet?Finally, ground pumping and downhole milling of the bridge plug has been tested?The testing results show that the performances of bridge plug meet the field application requirements.