当代化工
噹代化工
당대화공
Contemporary Chemical Industry
2015年
10期
2313-2316
,共4页
曹水%贾秀峰%曹祖宾%赵荣祥
曹水%賈秀峰%曹祖賓%趙榮祥
조수%가수봉%조조빈%조영상
超声氧化%脱硫%氮化碳%过氧化氢%空化作用
超聲氧化%脫硫%氮化碳%過氧化氫%空化作用
초성양화%탈류%담화탄%과양화경%공화작용
Ultrasound-assisted oxidative%Desulfurization%g-C3N4%Hydrogen peroxide%Cavitation
通过高温煅烧三聚氰胺的方法制备氮化碳。以氮化碳,甲酸为催化剂、过氧化氢为氧化剂、DMF为萃取剂超声氧化萃取脱除模拟油中的二苯并噻吩(DBT)。考察了反应温度、反应时间、氧化剂加入量、催化剂加入等因素对脱硫率的影响。结果表明,当模拟油:双氧水:甲酸的体积比为100∶3∶6、氮化碳为0.03 g、反应温度为50℃、反应时间为20 min、萃取剂 DMF 剂油比为0.25∶1时,二苯并噻吩的脱除率可以达到82.2%。催化剂重复使用3次后,脱硫率仍然保持在75%。
通過高溫煅燒三聚氰胺的方法製備氮化碳。以氮化碳,甲痠為催化劑、過氧化氫為氧化劑、DMF為萃取劑超聲氧化萃取脫除模擬油中的二苯併噻吩(DBT)。攷察瞭反應溫度、反應時間、氧化劑加入量、催化劑加入等因素對脫硫率的影響。結果錶明,噹模擬油:雙氧水:甲痠的體積比為100∶3∶6、氮化碳為0.03 g、反應溫度為50℃、反應時間為20 min、萃取劑 DMF 劑油比為0.25∶1時,二苯併噻吩的脫除率可以達到82.2%。催化劑重複使用3次後,脫硫率仍然保持在75%。
통과고온단소삼취청알적방법제비담화탄。이담화탄,갑산위최화제、과양화경위양화제、DMF위췌취제초성양화췌취탈제모의유중적이분병새분(DBT)。고찰료반응온도、반응시간、양화제가입량、최화제가입등인소대탈류솔적영향。결과표명,당모의유:쌍양수:갑산적체적비위100∶3∶6、담화탄위0.03 g、반응온도위50℃、반응시간위20 min、췌취제 DMF 제유비위0.25∶1시,이분병새분적탈제솔가이체도82.2%。최화제중복사용3차후,탈류솔잉연보지재75%。
g-C3N4 was prepared by high temperature calcination of melamine. Through oxidative desulfurization (ODS), dibenzothiophene (DBT) in simulated oil was removed by using g- C3N4,formic acid as catalysts, hydrogen peroxide as the oxidant, DMF liquid as extractant, under ultrasound irradiation. The influence of reaction temperature and time, ultrasound power, amount of hydrogen peroxide on the desulfurization efficiency was investigated. The results indicate that, under the optimal reaction conditions of V(model oil):V(H2O2):V(formic acid) = 100:3:6, g-C3N4 0.03 g,reaction temperature 50 ℃ and time 20 min, the desulfurization efficiency for DBT can reach to 82.2%. Moreover, the catalysts can be used for 3 times without a significant decrease of the desulfurization activity.