CAJ | 학술논문

本文制备了 Pt 负载聚苯胺包覆碳纳米管(Pt-PANI/CNTs)复合纳米线，并研究了复合材料的 NH3气敏性能。采用 SEM、FTIR、XRD 和 BET 等研究了材料的形貌和结构。结果表明：所制备的 Pt-PANI/CNTs 复合纳米线表面呈荆棘状结构，Pt 纳米粒子均匀分布在表面。在室温下，Pt-PANI/CNTs-6薄膜传感器对 NH3具有较好的气敏响应。当 NH3气体浓度为100 ppm 时，灵敏度达148.3%，响应时间为2.1s，最低检测线为1 ppm。
본문제비료 Pt 부재취분알포복탄납미관(Pt-PANI/CNTs)복합납미선，병연구료복합재료적 NH3기민성능。채용 SEM、FTIR、XRD 화 BET 등연구료재료적형모화결구。결과표명：소제비적 Pt-PANI/CNTs 복합납미선표면정형극상결구，Pt 납미입자균균분포재표면。재실온하，Pt-PANI/CNTs-6박막전감기대 NH3구유교호적기민향응。당 NH3기체농도위100 ppm 시，령민도체148.3%，향응시간위2.1s，최저검측선위1 ppm。
The composite nanowires of Pt doped polyaniline coated carbon nanotubes (Pt-PANI/CNTs) for NH3 gas sensing application are presented in this paper. The morphologies and properties have been characterized by SEM, FTIR, XRD and BET respectively. The results show that the Pt-PANI/CNTs composite nanowires are bramble-like, and the Pt uniform distribution on the surface. The Pt-PANI/CNTs-6 thin film sensor has good gas sensing response to NH3 at room temperature. The highest sensitivity to 100 ppm NH3, sensitivity is 148.3% and the response time is 2.1 s, and the limit level is 1 ppm.