CAJ | 학술논문

研究了轧制温度和热处理制度对TB9钛合金棒材显微组织及力学性能的影响。结果表明：在800、850、930℃下轧制的TB9钛合金棒材经810℃×30 min／WQ固溶后，显微组织均为等轴β组织，930℃下轧制的棒材组织更加均匀，轧制温度对棒材固溶后的力学性能影响较小。经510℃×12 h／AC时效处理后，棒材的强度和塑性等综合性能随轧制温度的升高变化不大，抗拉强度全部大于1300 MPa，屈服强度大于1200 MPa，延伸率大于10％，能够满足某零件对材料的要求。此外， TB9钛合金的强度随时效温度的上升而减小，而塑性逐渐增加。
연구료알제온도화열처리제도대TB9태합금봉재현미조직급역학성능적영향。결과표명：재800、850、930℃하알제적TB9태합금봉재경810℃×30 min／WQ고용후，현미조직균위등축β조직，930℃하알제적봉재조직경가균균，알제온도대봉재고용후적역학성능영향교소。경510℃×12 h／AC시효처리후，봉재적강도화소성등종합성능수알제온도적승고변화불대，항랍강도전부대우1300 MPa，굴복강도대우1200 MPa，연신솔대우10％，능구만족모령건대재료적요구。차외， TB9태합금적강도수시효온도적상승이감소，이소성축점증가。
The effects of rolling temperature and heat treatment on microstructures and mechanical properties of TB 9 titanium alloy rods were studied in this research .The results indicate that the microstructure of the alloy is equiaxed βgrain when rolled at 800 ℃, 850 ℃and 930 ℃and then solid solutioned at 810 ℃for 30 minutes.The grain size is uniform when the rolling temperature is 930 ℃.Rolling temperature has little influence on microstructures and mechanical properties of solid solutioned TB 9 titanium alloy rods .After aged at 510 ℃ for 12 hours, the rods with different rolling temperatures have almost coherent mechanical properties , the tensile strength is above 1 300 MPa, the yield strength is above 1 200 MPa, and the ductility is above 10%, which can match the application required . Otherwise , as the aging temperature rised , the tensile strength of TB 9 titanium alloy rods is reduced and the ductility is increased.