工业加热
工業加熱
공업가열
Industrial Heating
2015年
5期
56-58,63
,共4页
带钢%感应加热%电流密度%频率%曲面响应法
帶鋼%感應加熱%電流密度%頻率%麯麵響應法
대강%감응가열%전류밀도%빈솔%곡면향응법
strip steel%induction heating%current density%frequency%RSM
根据感应加热原理,利用ANSYS有限元软件,确定了电磁场、温度场的数学模型和求解的边界条件;根据模拟计算结果,分析了电流密度和频率对电磁场和温度场的影响。通过曲面相应法,确立感应加热的温度回归模型,分别建立温度与电流密度和频率的关系方程,并根据电流密度和频率的一阶微分方程,得出了电流密度对温度变化率影响较大。
根據感應加熱原理,利用ANSYS有限元軟件,確定瞭電磁場、溫度場的數學模型和求解的邊界條件;根據模擬計算結果,分析瞭電流密度和頻率對電磁場和溫度場的影響。通過麯麵相應法,確立感應加熱的溫度迴歸模型,分彆建立溫度與電流密度和頻率的關繫方程,併根據電流密度和頻率的一階微分方程,得齣瞭電流密度對溫度變化率影響較大。
근거감응가열원리,이용ANSYS유한원연건,학정료전자장、온도장적수학모형화구해적변계조건;근거모의계산결과,분석료전류밀도화빈솔대전자장화온도장적영향。통과곡면상응법,학립감응가열적온도회귀모형,분별건립온도여전류밀도화빈솔적관계방정,병근거전류밀도화빈솔적일계미분방정,득출료전류밀도대온도변화솔영향교대。
The mathematical models of electromagnetic field and temperature field are determined, based on the principle of induction heating, via the ANSYS FEM software. The effect of the current density and frequency of the coil on electromagnetic field and temperature field is analyzed according to the simulation results. With surface corresponding method, the relation equation between temperature and current density and frequency is built. The current density has larger influence on temperature gradient according to differential equation of first order of current density and frequency.