机械工程材料
機械工程材料
궤계공정재료
Materials for Mechanical Engineering
2015年
10期
1-4,10
,共5页
尹军军%富阳%董俊华%高炳军
尹軍軍%富暘%董俊華%高炳軍
윤군군%부양%동준화%고병군
聚乙烯管%应变循环%棘轮效应%应变幅
聚乙烯管%應變循環%棘輪效應%應變幅
취을희관%응변순배%극륜효응%응변폭
polyethylene pipe%cyclic strain%ratcheting%strain amplitude
在室温下对聚乙烯(PE100)管分别进行了单轴拉伸试验、扭转对称应变循环试验和单轴棘轮效应试验,探讨了不同应变速率下 PE 管的应力-应变响应,分析了循环应变幅、应变幅历史对应变循环特性的影响以及均值应力和幅值应力及其加载历史对 PE100管棘轮变形的影响。结果表明:PE100是一种率相关循环软化材料,无论应变循环特性还是单轴棘轮行为,两者都强烈依赖于当前的载荷条件和既往加载历史;PE100管存在产生循环硬化的对称扭转应变幅阈值,其值为5%,当 PE100管经历大于该阈值的循环后再经历后续小应变幅循环时会发生一定程度的硬化,但静置后这种硬化现象又会消失,表现出时效恢复特性。
在室溫下對聚乙烯(PE100)管分彆進行瞭單軸拉伸試驗、扭轉對稱應變循環試驗和單軸棘輪效應試驗,探討瞭不同應變速率下 PE 管的應力-應變響應,分析瞭循環應變幅、應變幅歷史對應變循環特性的影響以及均值應力和幅值應力及其加載歷史對 PE100管棘輪變形的影響。結果錶明:PE100是一種率相關循環軟化材料,無論應變循環特性還是單軸棘輪行為,兩者都彊烈依賴于噹前的載荷條件和既往加載歷史;PE100管存在產生循環硬化的對稱扭轉應變幅閾值,其值為5%,噹 PE100管經歷大于該閾值的循環後再經歷後續小應變幅循環時會髮生一定程度的硬化,但靜置後這種硬化現象又會消失,錶現齣時效恢複特性。
재실온하대취을희(PE100)관분별진행료단축랍신시험、뉴전대칭응변순배시험화단축극륜효응시험,탐토료불동응변속솔하 PE 관적응력-응변향응,분석료순배응변폭、응변폭역사대응변순배특성적영향이급균치응력화폭치응력급기가재역사대 PE100관극륜변형적영향。결과표명:PE100시일충솔상관순배연화재료,무론응변순배특성환시단축극륜행위,량자도강렬의뢰우당전적재하조건화기왕가재역사;PE100관존재산생순배경화적대칭뉴전응변폭역치,기치위5%,당 PE100관경력대우해역치적순배후재경력후속소응변폭순배시회발생일정정도적경화,단정치후저충경화현상우회소실,표현출시효회복특성。
The uniaxial tension test,cyclic strain test under symmetric torsion and uniaxial ratcheting test were carried out for Polyethylene 100 (PE100)pipe at room temperature.The stress-strain responses of the PE100 pipe under different strain rates were discussed.The effects of cyclic strain amplitude,mean stress,stress amplitude and their loading histories on strain cyclic characteristics and ratcheting deformations of PE100 pipe were studied. The results show that PE100 is a kind of rate-dependent and cyclic softening material.Both strain cyclic characteristic and uniaxial ratcheting behavior were all strongly dependent not only on the current load condition,but also on the prior loading history.There was a threshold value to induce cyclic hardening for PE100 under symmetric torsion,namely 5% torsion strain amplitude.The former cyclic load larger than the threshold value induced cyclic hardening of PE100 under the following smaller load conditions.However such kind of hardening would vanish after standing for some time,indicating recovery ageing effect of PE100.