上海计量测试
上海計量測試
상해계량측시
Shanghai Measurement and Testing
2015年
5期
15-17
,共3页
纳米厚度薄膜%标准物质%均匀性%稳定性
納米厚度薄膜%標準物質%均勻性%穩定性
납미후도박막%표준물질%균균성%은정성
nano-iflm thickness%reference material%uniformity%stability
通过选用X射线光电子能谱(XPS)测量方法,对上海市计量测试技术研究院所研制的纳米薄膜厚度标准物质的组成及化合态进行了分析,并考察了薄膜厚度的均匀性和稳定性。实验结果表明,所研制的标准物质的薄膜组成为氧化钽,薄膜的均匀性以及在监测期内的稳定性良好。该标准物质可以作为产品质量控制、设备校准以及测试方法验证的国家计量器具使用,完全满足标准物质使用要求。
通過選用X射線光電子能譜(XPS)測量方法,對上海市計量測試技術研究院所研製的納米薄膜厚度標準物質的組成及化閤態進行瞭分析,併攷察瞭薄膜厚度的均勻性和穩定性。實驗結果錶明,所研製的標準物質的薄膜組成為氧化鐽,薄膜的均勻性以及在鑑測期內的穩定性良好。該標準物質可以作為產品質量控製、設備校準以及測試方法驗證的國傢計量器具使用,完全滿足標準物質使用要求。
통과선용X사선광전자능보(XPS)측량방법,대상해시계량측시기술연구원소연제적납미박막후도표준물질적조성급화합태진행료분석,병고찰료박막후도적균균성화은정성。실험결과표명,소연제적표준물질적박막조성위양화단,박막적균균성이급재감측기내적은정성량호。해표준물질가이작위산품질량공제、설비교준이급측시방법험증적국가계량기구사용,완전만족표준물질사용요구。
In this paper, the composition and chemical state of the nano-iflm thickness reference material which developed by Shanghai Institute of Measurement and Testing Technology are analyzed by using X-ray photoelectron spectroscopy (XPS) method, and the uniformity and stability of iflm thickness are also investigated. The results show that the nano-iflm of the reference material is composed of tantalum pentoxide. The uniformity of the nano-film and the stability of the film during the monitoring period are good. The reference material can be used as the national measurement apparatus for the product quality control, instrument calibration and measurement method validation, which fully meet the requirements of the use of the reference material.