中国医疗设备
中國醫療設備
중국의료설비
China Medical Devices
2015年
10期
25-27
,共3页
陈东方%曹海虹%刘亚琴%刘雪连%刘亚军
陳東方%曹海虹%劉亞琴%劉雪連%劉亞軍
진동방%조해홍%류아금%류설련%류아군
流程管理%人工关节植入物%外来器械%感染率%清洗消毒%灭菌
流程管理%人工關節植入物%外來器械%感染率%清洗消毒%滅菌
류정관리%인공관절식입물%외래기계%감염솔%청세소독%멸균
process management%joint prosthesis implants%external instruments%infection rate%cleaning and disinfection%sterilization
目的:探讨流程管理在人工关节植入物及外来器械管理中的方法及效果,确保植入物及外来器械质量安全。方法运用流程管理理论和方法,对流程进行规范、优化和再造。通过充分调查分析,多部门联合管理,制定出规范、科学的外来器械管理流程。医务部、感染管理科制定规范的准入制度,医学工程科进行规范的验收签字,消毒供应中心进行植入物抽检,并对外来器械进行详细的检查登记后,按规范流程进行清洗、检查、包装、灭菌后送至手术室备用,手术室护士按照各种登记信息检查清点各种器械及植入物,根据手术中使用植入物的编码进行三方签字后,医工科进行扫码确认并实施计费。结果通过流程规范管理,人工关节置换的患者647名,无1例因植入物型号不合格或因器械清洗消毒灭菌不合格造成的手术延误,患者手术切口感染率由上一年度6.02%下降至2.78%;人工关节植入物感染率由1.54%下降至0.77%;人工关节植入物漏费率由2.23%下降为0.00%,手术延误率由1.72%下降至0.00%,4项指标均有统计学意义(P<0.05)。结论通过建立规范的流程管理,可以有效地提高人工关节植入物及外来器械的管理水平,有效地降低手术切口及植入物的感染率,保证患者的安全,减少患者漏费的发生。
目的:探討流程管理在人工關節植入物及外來器械管理中的方法及效果,確保植入物及外來器械質量安全。方法運用流程管理理論和方法,對流程進行規範、優化和再造。通過充分調查分析,多部門聯閤管理,製定齣規範、科學的外來器械管理流程。醫務部、感染管理科製定規範的準入製度,醫學工程科進行規範的驗收籤字,消毒供應中心進行植入物抽檢,併對外來器械進行詳細的檢查登記後,按規範流程進行清洗、檢查、包裝、滅菌後送至手術室備用,手術室護士按照各種登記信息檢查清點各種器械及植入物,根據手術中使用植入物的編碼進行三方籤字後,醫工科進行掃碼確認併實施計費。結果通過流程規範管理,人工關節置換的患者647名,無1例因植入物型號不閤格或因器械清洗消毒滅菌不閤格造成的手術延誤,患者手術切口感染率由上一年度6.02%下降至2.78%;人工關節植入物感染率由1.54%下降至0.77%;人工關節植入物漏費率由2.23%下降為0.00%,手術延誤率由1.72%下降至0.00%,4項指標均有統計學意義(P<0.05)。結論通過建立規範的流程管理,可以有效地提高人工關節植入物及外來器械的管理水平,有效地降低手術切口及植入物的感染率,保證患者的安全,減少患者漏費的髮生。
목적:탐토류정관리재인공관절식입물급외래기계관리중적방법급효과,학보식입물급외래기계질량안전。방법운용류정관리이론화방법,대류정진행규범、우화화재조。통과충분조사분석,다부문연합관리,제정출규범、과학적외래기계관리류정。의무부、감염관이과제정규범적준입제도,의학공정과진행규범적험수첨자,소독공응중심진행식입물추검,병대외래기계진행상세적검사등기후,안규범류정진행청세、검사、포장、멸균후송지수술실비용,수술실호사안조각충등기신식검사청점각충기계급식입물,근거수술중사용식입물적편마진행삼방첨자후,의공과진행소마학인병실시계비。결과통과류정규범관리,인공관절치환적환자647명,무1례인식입물형호불합격혹인기계청세소독멸균불합격조성적수술연오,환자수술절구감염솔유상일년도6.02%하강지2.78%;인공관절식입물감염솔유1.54%하강지0.77%;인공관절식입물루비솔유2.23%하강위0.00%,수술연오솔유1.72%하강지0.00%,4항지표균유통계학의의(P<0.05)。결론통과건립규범적류정관리,가이유효지제고인공관절식입물급외래기계적관리수평,유효지강저수술절구급식입물적감염솔,보증환자적안전,감소환자루비적발생。
Objective To investigate the methods and results of process management in joint prosthesis implants and external instruments, in order to ensure the quality safety in operation.Methods In view of the theory and methods of process management, the process management of joint prosthesis implants and external instruments were standardized, optimized and regenerated by cooperation of related department through enough investigation and analysis. That is to say, standardized admittance criterion was made by medical department and infection management department; standardized checking and signing were made by medical engineering department, and implants sampling and detailed external instruments recording were implemented by disinfection and supply center. After that, cleaning, examining, packaging and sterilization were performed for all the implants and external instruments based on standardized process. And all the implants and external instruments were checked carefully by operating nurses according to their own recording information, and their information code should be conifrmed and charged by medical engineering department.Results Among all the 647 patients with joint prosthesis replacement, none of them occurred surgery delaying caused by incompetent type of implants and unqualiifed instruments sterilization. The infection rate of operative incision decreased from 6.02% last year to 2.78%; the infection rate of joint prosthesis implants decreased from 1.54% to 0.77%; the loss rate of unpaying in joint prosthesis implants decreased from 2.23% to zero; and the incidence of delayed surgery decreased from 1.72% to 0.0% (allP<0.05).Conclusion The management level of joint prosthesis implants and external instruments could be improved greatly by standardized process management, thus to decrease infection rate of operative incision and implants effectively, and ensure the safety of patients and lower the loss rate of unpaying.