南京师范大学学报(工程技术版)
南京師範大學學報(工程技術版)
남경사범대학학보(공정기술판)
Journal of Nanjing Normal University(Engineering and Technology Edition)
2015年
3期
70-74
,共5页
纸张输送%滚动接触%数值分析
紙張輸送%滾動接觸%數值分析
지장수송%곤동접촉%수치분석
paper feed%rolling contact%numerical analysis
研究纸张输送系统中弹性胶辊与刚性辊轮接触区域的应力应变分布.建立弹性胶辊与刚性辊轮接触的数学模型,应用配点法对问题进行求解,得到正压力和弹性层厚度对接触区域应力应变分布的影响.正压力与接触区域的应力成正比,弹性层厚度与接触区域的应力成反比.为纸张输送胶辊的设计提供参考.
研究紙張輸送繫統中彈性膠輥與剛性輥輪接觸區域的應力應變分佈.建立彈性膠輥與剛性輥輪接觸的數學模型,應用配點法對問題進行求解,得到正壓力和彈性層厚度對接觸區域應力應變分佈的影響.正壓力與接觸區域的應力成正比,彈性層厚度與接觸區域的應力成反比.為紙張輸送膠輥的設計提供參攷.
연구지장수송계통중탄성효곤여강성곤륜접촉구역적응력응변분포.건립탄성효곤여강성곤륜접촉적수학모형,응용배점법대문제진행구해,득도정압력화탄성층후도대접촉구역응력응변분포적영향.정압력여접촉구역적응력성정비,탄성층후도여접촉구역적응력성반비.위지장수송효곤적설계제공삼고.
To study the stress and deformation distribution of the contact zone between the rubber roller and rigid roller, a mathematical model of rolling contact between the rubber roller and rigid roller is built. The model is derived from the paper feed unit. The collocation method is applied to obtain the solution of the dual series equations obtaining based on elasticity theory. Effects of normal load and rubber thickness are observed through the numerical examples. The observa?tions show that the stress of the contact zone is directly proportional to normal load,and inversely proportional to rubber thickness. It is available for improving the efficiency of rubber roller.