辽宁科技学院学报
遼寧科技學院學報
료녕과기학원학보
Journal of Liaoning Institute of Science and Technology
2015年
3期
12-13,4
,共3页
三氧化二钒%钒铁%电铝热法%铝钙铁
三氧化二釩%釩鐵%電鋁熱法%鋁鈣鐵
삼양화이범%범철%전려열법%려개철
V2 O3%Ferrovanadium%Electrical thermite%AlCaFe
以三氧化二钒为原料,加入精炼剂,采用电铝热法制备了钒铁,并对其相关工艺参数进行了研究。研究得到较佳的工艺参数为:以铝钙铁为精炼剂,精炼时间为30分钟,还原剂铝的添加量为理论量的103%时,钒的回收率可达98%左右。
以三氧化二釩為原料,加入精煉劑,採用電鋁熱法製備瞭釩鐵,併對其相關工藝參數進行瞭研究。研究得到較佳的工藝參數為:以鋁鈣鐵為精煉劑,精煉時間為30分鐘,還原劑鋁的添加量為理論量的103%時,釩的迴收率可達98%左右。
이삼양화이범위원료,가입정련제,채용전려열법제비료범철,병대기상관공예삼수진행료연구。연구득도교가적공예삼수위:이려개철위정련제,정련시간위30분종,환원제려적첨가량위이론량적103%시,범적회수솔가체98%좌우。
Taking V2O3 as raw material, and adding the refining agent, the paper introduces the ferrovanadium smelting with electrical thermite process , and studies its technological parameters .The optimum conditions are difined as bellow:using AlCaFe as refining a-gent, the refining time is 30 menutes, the amount of reducing agent Al is 103%of the theoretical quantity , and the recovery of vanadi-um is 98%.