CAJ | 학술논문

以破壁灵芝孢子粉为对象，采用喷雾干燥法研究了孢壁重塑的灵芝孢子粉制备技术，并进行了产品分析。结果表明，以羟丙甲纤维素和大豆分离蛋白为复合壁材，优选比例为2∶1，壁材与芯材比例为2∶1；固形物浓度为30％；重塑工艺参数为均质压力为40 M Pa ，均质次数2次，喷雾干燥进风温度220℃，出风温度105℃，孢壁重塑率为90.2％；制备的产品分散性好，抗氧化性强。
이파벽령지포자분위대상，채용분무간조법연구료포벽중소적령지포자분제비기술，병진행료산품분석。결과표명，이간병갑섬유소화대두분리단백위복합벽재，우선비례위2∶1，벽재여심재비례위2∶1；고형물농도위30％；중소공예삼수위균질압력위40 M Pa ，균질차수2차，분무간조진풍온도220℃，출풍온도105℃，포벽중소솔위90.2％；제비적산품분산성호，항양화성강。
Technology and product were put forward in this paper ,for remodeling wall of Ganoderma lucidum spores based on spray drying process .The results showed that :the hydroxypropyl methyl cellulose and soy protein isolates were selected as composite wall material ,optimal ratio of hydroxypropyl methyl cellulose and soybean protein isolates was 2∶1 ,ratio of wall material and core material was 2∶1 ,and solids concentration was 30% .The processing parameters and product characteristics were as follows :homogeneity pressure was 40 MPa ,homogeneity times was 2 ,inlet air temperature was 220 ℃ and outlet temperature was 105 ℃ ,percent of remodeled spores wall was 90 .2% ,and the product had good dispersivity and strong anti‐oxidation .