矿业安全与环保
礦業安全與環保
광업안전여배보
Mining Safety & Environmental Protection
2015年
5期
81-83,91
,共4页
陈才贤%苏静%汤铸%李文斌
陳纔賢%囌靜%湯鑄%李文斌
진재현%소정%탕주%리문빈
突出煤层%突出危险性%窄煤柱%沿空掘巷%瓦斯涌出%防突
突齣煤層%突齣危險性%窄煤柱%沿空掘巷%瓦斯湧齣%防突
돌출매층%돌출위험성%착매주%연공굴항%와사용출%방돌
outburst coal seam%outburst danger%narrow coal pillar%gob-side roadway driving%gas emission%outburst prevention
为了降低煤巷掘进过程中的突出危险性,提高巷道掘进效率,在水城矿区C11突出煤层中实施了41113回风平巷留5 m煤柱沿空掘巷技术,同时采用锚网喷支护,最高掘进进度达145 m/月,瓦斯涌出量为1. 58 m3/min,瓦斯浓度为0. 54%,钻孔效验指标K1 值为0. 384 1 mL/(g·min1/2),Smax值为2. 5 kg/m. 该技术的应用表明:留窄煤柱沿空掘巷仅需采用安全防护措施掘进,减少了防突工程量,提高了巷道的掘进速度,增加了煤炭资源回采率,确保了突出煤层的安全高效生产.
為瞭降低煤巷掘進過程中的突齣危險性,提高巷道掘進效率,在水城礦區C11突齣煤層中實施瞭41113迴風平巷留5 m煤柱沿空掘巷技術,同時採用錨網噴支護,最高掘進進度達145 m/月,瓦斯湧齣量為1. 58 m3/min,瓦斯濃度為0. 54%,鑽孔效驗指標K1 值為0. 384 1 mL/(g·min1/2),Smax值為2. 5 kg/m. 該技術的應用錶明:留窄煤柱沿空掘巷僅需採用安全防護措施掘進,減少瞭防突工程量,提高瞭巷道的掘進速度,增加瞭煤炭資源迴採率,確保瞭突齣煤層的安全高效生產.
위료강저매항굴진과정중적돌출위험성,제고항도굴진효솔,재수성광구C11돌출매층중실시료41113회풍평항류5 m매주연공굴항기술,동시채용묘망분지호,최고굴진진도체145 m/월,와사용출량위1. 58 m3/min,와사농도위0. 54%,찬공효험지표K1 치위0. 384 1 mL/(g·min1/2),Smax치위2. 5 kg/m. 해기술적응용표명:류착매주연공굴항부수채용안전방호조시굴진,감소료방돌공정량,제고료항도적굴진속도,증가료매탄자원회채솔,학보료돌출매층적안전고효생산.
In order to reduce the outburst danger in the coal roadway driving and improve the drivage efficiency of the roadway, gob-side roadway driving technology by presetting 5 m-wide coal pillar was practiced in No. 41113 return airway in C11 outburst seam of Shuicheng Coal Mining Area, and meanwhile the support pattern by using shotcrete and bolting wire mesh was adopted, the maximum driving rate of the return airway was 145 m/month, the gas emission quantity was 1. 58 m3/min, the gas concentration was 0. 54%, the borehole collation index K1 was 0. 384 1 mL/( g · min1/2 ) and Smax was 2. 5 kg/m. The application of this technology showed that the gob-side entry driving by presetting narrow coal pillar only need to take safety protection measures for the driving, so it can reduce the engineering quantity of outburst prevention, speed up the roadway driving, improve the recovery rate of coal resources and ensure the safety and high efficient product of the outburst coal seam.