橡胶科技
橡膠科技
상효과기
Rubber Science and Technology
2015年
9期
37-40
,共4页
工程机械轮胎%胎体%混炼工艺%H抽出力%自粘性
工程機械輪胎%胎體%混煉工藝%H抽齣力%自粘性
공정궤계륜태%태체%혼련공예%H추출력%자점성
OTR tire%carcass%mixing process%H pull-out force%tackiness
研究工程机械轮胎胎体胶混炼工艺改进对胶料性能的影响。结果表明:通过将炭黑分2段加入,并将防老剂和塑解剂分开加入,混炼效率提高,塑解剂效能得到保护;与改进前胶料相比,改进后胶料的门尼粘度降低,硫化特性变化不大,硬度、定伸应力、拉伸强度和撕裂强度相当,H抽出力明显增大,自粘性显著提高,流动性好,压延半成品尺寸稳定性提高。
研究工程機械輪胎胎體膠混煉工藝改進對膠料性能的影響。結果錶明:通過將炭黑分2段加入,併將防老劑和塑解劑分開加入,混煉效率提高,塑解劑效能得到保護;與改進前膠料相比,改進後膠料的門尼粘度降低,硫化特性變化不大,硬度、定伸應力、拉伸彊度和撕裂彊度相噹,H抽齣力明顯增大,自粘性顯著提高,流動性好,壓延半成品呎吋穩定性提高。
연구공정궤계륜태태체효혼련공예개진대효료성능적영향。결과표명:통과장탄흑분2단가입,병장방로제화소해제분개가입,혼련효솔제고,소해제효능득도보호;여개진전효료상비,개진후효료적문니점도강저,류화특성변화불대,경도、정신응력、랍신강도화시렬강도상당,H추출력명현증대,자점성현저제고,류동성호,압연반성품척촌은정성제고。
The mixing process of carcass compound of OTR tire was optimized and its influence on the properties of the compound was studied. In the optimized process, carbon black was added in two stages, and the antioxidant and peptizer were added separately. The mixing efficiency was then improved and peptizer was effectively protected. The experimental testing results showed that after optimization the Mooney viscosity of the compound was reduced, curing characteristic didn’t change, the hardness, tensile modulus, tensile strength and tear strength of the vulcanizates were also kept unchanged, but the H pull-out force and tackiness of the compound increased significantly, the flowability was better, and the dimensional stability of the calendered semi-finished products was improved.