工业控制计算机
工業控製計算機
공업공제계산궤
Industrial Control Computer
2015年
10期
47-48
,共2页
自动下料机%ATmega64%VC++6.0%MAX232%电机伺服%无线遥控
自動下料機%ATmega64%VC++6.0%MAX232%電機伺服%無線遙控
자동하료궤%ATmega64%VC++6.0%MAX232%전궤사복%무선요공
automatic laying off%ATmega64%VC++6.0%MAX232%motor servo%wireless contrdler
设计了一个基于AVE ATmega64单片机的自动下料机系统.系统通过MAX232串口实时接收电子称回传的重量数据,比对设置的下料重量,当达到设置的重量时,关闭该下料口的继电器,同时控制电机伺服移动到下一个下料口,当最后一个下料口下料结束后,系统控制电机回转至起始位置.系统通过无线控制器模块有效的解决了转动带多次运作后的皮带迟滞现象.电机驱动芯片采用26LS32,上位机用VC++6.0编写.
設計瞭一箇基于AVE ATmega64單片機的自動下料機繫統.繫統通過MAX232串口實時接收電子稱迴傳的重量數據,比對設置的下料重量,噹達到設置的重量時,關閉該下料口的繼電器,同時控製電機伺服移動到下一箇下料口,噹最後一箇下料口下料結束後,繫統控製電機迴轉至起始位置.繫統通過無線控製器模塊有效的解決瞭轉動帶多次運作後的皮帶遲滯現象.電機驅動芯片採用26LS32,上位機用VC++6.0編寫.
설계료일개기우AVE ATmega64단편궤적자동하료궤계통.계통통과MAX232천구실시접수전자칭회전적중량수거,비대설치적하료중량,당체도설치적중량시,관폐해하료구적계전기,동시공제전궤사복이동도하일개하료구,당최후일개하료구하료결속후,계통공제전궤회전지기시위치.계통통과무선공제기모괴유효적해결료전동대다차운작후적피대지체현상.전궤구동심편채용26LS32,상위궤용VC++6.0편사.
The automatic laying-off machine system is designed based on ATmega64 microcontrol er in this paper. Through MAX232 serial real-time receiving electronic rebound,according to the data of the weight,the system compares the material weight which we set of.When it get to the set weight,close the relay.At the same time,move motor servo feed opening to the next.When the last feed opening after blanking,the system set motor back to the starting position.By using wireless control er module,the system effectively solves the problem which the delays when rotation working repeatedly.Motor driver chip is 26 ls32,PC written by VC++ 6.0.
