安徽电气工程职业技术学院学报
安徽電氣工程職業技術學院學報
안휘전기공정직업기술학원학보
Journal of Anhui Electrical Engineering Professional Technique College
2015年
3期
61-64
,共4页
45钢%氧化风机%轴%热处理%失效分析
45鋼%氧化風機%軸%熱處理%失效分析
45강%양화풍궤%축%열처리%실효분석
45 steel%oxidation fan%shaft%heat treatment%failure analysis
采用金相检验、化学成分分析、力学性能测试及断口SEM检验等试验手段,结合现场情况调研对45钢氧化风机轴在使用过程中发生断裂的原因进行了分析. 结果表明:氧化风机轴的断裂形式为脆性解理断裂,金相组织为非均匀稳定的退火态组织,缺口敏感性较大. 加之氧化风机运行环境恶劣,振动和长时间超负荷运行导致在轴的表面形成疲劳裂纹最终导致轴的断裂失效. 针对上述问题提出了相关预防措施.
採用金相檢驗、化學成分分析、力學性能測試及斷口SEM檢驗等試驗手段,結閤現場情況調研對45鋼氧化風機軸在使用過程中髮生斷裂的原因進行瞭分析. 結果錶明:氧化風機軸的斷裂形式為脆性解理斷裂,金相組織為非均勻穩定的退火態組織,缺口敏感性較大. 加之氧化風機運行環境噁劣,振動和長時間超負荷運行導緻在軸的錶麵形成疲勞裂紋最終導緻軸的斷裂失效. 針對上述問題提齣瞭相關預防措施.
채용금상검험、화학성분분석、역학성능측시급단구SEM검험등시험수단,결합현장정황조연대45강양화풍궤축재사용과정중발생단렬적원인진행료분석. 결과표명:양화풍궤축적단렬형식위취성해리단렬,금상조직위비균균은정적퇴화태조직,결구민감성교대. 가지양화풍궤운행배경악렬,진동화장시간초부하운행도치재축적표면형성피로렬문최종도치축적단렬실효. 침대상술문제제출료상관예방조시.
Metallographic examination, chemical composition, mechanical property, fracture SEM inspi-ration are used for failure analysis in the fracture of 45 steel oxidation fan shaft of power plant boiler com-bining with on-site investigation of the case of the shaft.The result indicates that the fracture mode is brittle cleavage fracture.The micro-structure is unstable annealed organization.The notch sensitivity of shaft is obviously.Combined with the harsh operating environment,vibration and overload with long time lead to the formation of fatigue cracks in the surface of the shaft.Preventive measures are put forward fi-nally.